Tag Archives: motor robot

China Hot selling Low Cost Harmonic Drive Gearboxes Csg for Servo Motot & Stepper Motor Used in Robot Arms manufacturer

Product Description

Product Description:

1.Flexspline is a hollow flanging standard cylinder structure.

2.There is a large-diameter hollow shaft hole in the middle of the cam of the wave generator. The internal design of the reducer has a support bearing.

3.It has a fully sealed structure and is easy to install. It is very suitable for the occasions where the wire needs to be threaded from the center of the reducer.

Advantages:

The first:High precision,high torque

The second:dedicated technical personnel can be on-the-go to provide design solutions

The third:Factory direct sales fine workmanship durable quality assurance

The fourth:Product quality issues have a one-year warranty time, can be returned for replacement or repair

Company profile:

 

HangZhou CZPT Technology Co., Ltd. established in 2014, is committed to the R & D plant of high-precision transmission components. At present, the annual production capacity can reach 45000 sets of harmonic reducers. We firmly believe in quality first. All links from raw materials to finished products are strictly supervised and controlled, which provides a CZPT foundation for product quality. Our products are sold all over the country and abroad.

The harmonic reducer and other high-precision transmission components were independently developed by the company. Our company spends 20% of its sales every year on the research and development of new technologies in the industry. There are 5 people in R & D.

Our advantage is as below:

1.7 years of marketing experience

2. 5-person R & D team to provide you with technical support

3. It is sold at home and abroad and exported to Turkey and Ireland

4. The product quality is guaranteed with a one-year warranty

5. Products can be customized

Strength factory:

Our plant has an entire campus The number of workshops is around 300 Whether it’s from the production of raw materials and the procurement of raw materials to the inspection of finished products, we’re doing it ourselves. There is a complete production system

HST-III Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 6.2 0.6 20.7 2.1 7.9 0.7 40.3 4.1 7000 3000 ≤30 10000
80 9 0.9 27 2.7 12.7 1.3 54.1 5.5
100 9 0.9 32 3.3 12.7 1.3 62.1 6.3
17 50 18.4 1.9 39 4 29.9 3 80.5 8.2 6500 3000 ≤30 15000
80 25.3 2.6 49.5 5 31 3.2 100.1 10.2
100 27.6 2.8 62 6.3 45 4.6 124.2 12.7
20 50 28.8 2.9 64.4 6.6 39 4 112.7 11.5 5600 3000 ≤30 15000
80 39.1 4 85 8.8 54 5.5 146.1 14.9
100 46 4.7 94.3 9.6 56 5.8 169.1 17.2
120 46 4.7 100 10.2 56 5.8 169.1 17.2
160 46 4.7 100 10.2 56 5.8 169.1 17.2
25 50 44.9 4.6 113 11.5 63 6.5 213.9 21.8 4800 3000 ≤30 15000
80 72.5 7.4 158 16.1 100 10.2 293.3 29.9
100 77.1 7.9 181 18.4 124 12.7 326.6 33.3
120 77.1 7.9 192 19.6 124 12.7 349.6 35.6
32 50 87.4 8.9 248 25.3 124 12.7 439 44.8 4000 3000 ≤30 15000
80 135.7 13.8 350 35.6 192 19.6 653 66.6
100 157.6 16.1 383 39.1 248 25.3 744 75.9
40 100 308 37.2 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

HSG Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 7 0.7 23 2.3 9 0.9 46 4.7 14000 8500 ≤20 15000
80 10 1 30 3.1 14 1.4 61 6.2
100 10 1 36 3.7 14 1.4 70 7.2
17 50 21 2.1 44 4.5 34 3.4 91 9 10000 7300 ≤20 20000
80 29 2.9 56 5.7 35 3.6 113 12
100 31 3.2 70 7.2 51 5.2 143 15
20 50 33 3.3 73 7.4 44 4.5 127 13 10000 6500 ≤20 20000
80 44 4.5 96 9.8 61 6.2 165 17
100 52 5.3 107 10.9 64 6.5 191 20
120 52 5.3 113 11.5 64 6.5 191 20
160 52 5.3 120 12.2 64 6.5 191 20
25 50 51 5.2 127 13 72 7.3 242 25 7500 5600 ≤20 20000
80 82 8.4 178 18 113 12 332 34
100 87 8.9 204 21 140 14 369 38
120 87 8.9 217 22 140 14 395 40
32 50 99 10 281 29 140 14 497 51 7000 4800 ≤20 20000
80 153 16 395 40 217 22 738 75
100 178 18 433 44 281 29 841 86
40 100 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000

Exhibition:

Application case:

FQA:
Q: What should I provide when I choose gearbox/speed reducer?
A: The best way is to provide the motor drawing with parameter. Our engineer will check and recommend the most suitable gearbox model for your refer.
Or you can also provide below specification as well:
1) Type, model and torque.
2) Ratio or output speed
3) Working condition and connection method
4) Quality and installed machine name
5) Input mode and input speed
6) Motor brand model or flange and motor shaft size

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Car
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step
Customization:
Available

|

Customized Request

gearbox

Key Market Insights Related to Worm Reduction Gearboxes

A gearbox is a mechanical device that allows you to shift between different speeds or gears. It does so by using one or more clutches. Some gearboxes are single-clutch, while others use two clutches. You can even find a gearbox with closed bladders. These are also known as dual clutches and can shift gears more quickly than other types. Performance cars are designed with these types of gearboxes.

Backlash measurement

Gearbox backlash is a common component that can cause noise or other problems in a car. In fact, the beats and sets of gears in a gearbox are often excited by the oscillations of the engine torque. Noise from gearboxes can be significant, particularly in secondary shafts that engage output gears with a differential ring. To measure backlash and other dimensional variations, an operator can periodically take the output shaft’s motion and compare it to a known value.
A comparator measures the angular displacement between two gears and displays the results. In one method, a secondary shaft is disengaged from the gearbox and a control gauge is attached to its end. A threaded pin is used to secure the differential crown to the secondary shaft. The output pinion is engaged with the differential ring with the aid of a control gauge. The angular displacement of the secondary shaft is then measured by using the dimensions of the output pinion.
Backlash measurements are important to ensure the smooth rotation of meshed gears. There are various types of backlash, which are classified according to the type of gear used. The first type is called circumferential backlash, which is the length of the pitch circle around which the gear rotates to make contact. The second type, angular backlash, is defined as the maximum angle of movement between two meshed gears, which allows the other gear to move when the other gear is stationary.
The backlash measurement for gearbox is one of the most important tests in the manufacturing process. It is a criterion of tightness or looseness in a gear set, and too much backlash can jam a gear set, causing it to interface on the weaker part of its gear teeth. When backlash is too tight, it can lead to gears jamming under thermal expansion. On the other hand, too much backlash is bad for performance.

Worm reduction gearboxes

Worm reduction gearboxes are used in the production of many different kinds of machines, including steel and power plants. They are also used extensively in the sugar and paper industries. The company is constantly aiming to improve their products and services to remain competitive in the global marketplace. The following is a summary of key market insights related to this type of gearbox. This report will help you make informed business decisions. Read on to learn more about the advantages of this type of gearbox.
Compared to conventional gear sets, worm reduction gearboxes have few disadvantages. Worm gear reducers are commonly available and manufacturers have standardized their mounting dimensions. There are no unique requirements for shaft length, height, and diameter. This makes them a very versatile piece of equipment. You can choose to use one or combine several worm gear reducers to fit your specific application. And because they have standardized ratios, you will not have to worry about matching up multiple gears and determining which ones fit.
One of the primary disadvantages of worm reduction gearboxes is their reduced efficiency. Worm reduction gearboxes usually have a maximum reduction ratio of five to sixty. The higher-performance hypoid gears have an output speed of around ten to twelve revolutions. In these cases, the reduced ratios are lower than those with conventional gearing. Worm reduction gearboxes are generally more efficient than hypoid gear sets, but they still have a low efficiency.
The worm reduction gearboxes have many advantages over traditional gearboxes. They are simple to maintain and can work in a range of different applications. Because of their reduced speed, they are perfect for conveyor belt systems.
gearbox

Worm reduction gearboxes with closed bladders

The worm and the gear mesh with each other in a combination of sliding and rolling movements. This sliding action is dominant at high reduction ratios, and the worm and gear are made of dissimilar metals, which results in friction and heat. This limits the efficiency of worm gears to around thirty to fifty percent. A softer material for the gear can be used to absorb shock loads during operation.
A normal gear changes its output independently once a sufficient load is applied. However, the backstop complicates the gear configuration. Worm gears require lubrication because of the sliding wear and friction introduced during movement. A common gear arrangement moves power at the peak load section of a tooth. The sliding happens at low speeds on either side of the apex and occurs at a low velocity.
Single-reduction gearboxes with closed bladders may not require a drain plug. The reservoir for a worm gear reducer is designed so that the gears are in constant contact with lubricant. However, the closed bladders will cause the worm gear to wear out more quickly, which can cause premature wear and increased energy consumption. In this case, the gears can be replaced.
Worm gears are commonly used for speed reduction applications. Unlike conventional gear sets, worm gears have higher reduction ratios. The number of gear teeth in the worm reduces the speed of a particular motor by a substantial amount. This makes worm gears an attractive option for hoisting applications. In addition to their increased efficiency, worm gears are compact and less prone to mechanical failure.

Shaft arrangement of a gearbox

The ray-diagram of a gearbox shows the arrangement of gears in the various shafts of the transmission. It also shows how the transmission produces different output speeds from a single speed. The ratios that represent the speed of the spindle are called the step ratio and the progression. A French engineer named Charles Renard introduced five basic series of gearbox speeds. The first series is the gear ratio and the second series is the reverse gear ratio.
The layout of the gear axle system in a gearbox relates to its speed ratio. In general, the speed ratio and the centre distance are coupled by the gear axles to form an efficient transmission. Other factors that may affect the layout of the gear axles include space constraints, the axial dimension, and the stressed equilibrium. In October 2009, the inventors of a manual transmission disclosed the invention as No. 2. These gears can be used to realize accurate gear ratios.
The input shaft 4 in the gear housing 16 is arranged radially with the gearbox output shaft. It drives the lubricating oil pump 2. The pump draws oil from a filter and container 21. It then delivers the lubricating oil into the rotation chamber 3. The chamber extends along the longitudinal direction of the gearbox input shaft 4, and it expands to its maximum diameter. The chamber is relatively large, due to a detent 43.
Different configurations of gearboxes are based on their mounting. The mounting of gearboxes to the driven equipment dictates the arrangement of shafts in the gearbox. In certain cases, space constraints also affect the shaft arrangement. This is the reason why the input shaft in a gearbox may be offset horizontally or vertically. However, the input shaft is hollow, so that it can be connected to lead through lines or clamping sets.
gearbox

Mounting of a gearbox

In the mathematical model of a gearbox, the mounting is defined as the relationship between the input and output shafts. This is also known as the Rotational Mount. It is one of the most popular types of models used for drivetrain simulation. This model is a simplified form of the rotational mount, which can be used in a reduced drivetrain model with physical parameters. The parameters that define the rotational mount are the TaiOut and TaiIn of the input and output shaft. The Rotational Mount is used to model torques between these two shafts.
The proper mounting of a gearbox is crucial for the performance of the machine. If the gearbox is not aligned properly, it may result in excessive stress and wear. It may also result in malfunctioning of the associated device. Improper mounting also increases the chances of the gearbox overheating or failing to transfer torque. It is essential to ensure that you check the mounting tolerance of a gearbox before installing it in a vehicle.

China Hot selling Low Cost Harmonic Drive Gearboxes Csg for Servo Motot & Stepper Motor Used in Robot Arms   manufacturer China Hot selling Low Cost Harmonic Drive Gearboxes Csg for Servo Motot & Stepper Motor Used in Robot Arms   manufacturer
editor by CX 2023-06-12

China Kinmore 24V Gear Motor Volt Small DC Gearbox with Diameter 37mm for Charging Robot automatic gearbox

Merchandise Description

 

Item Parameters

Model No.:KM-42F555-238-1223.7

Dimension specifics:
Motor Diameter: φ42mm
Motor Housing Duration :57mm
Shaft size: customization

Specs:
 

Ratio Model No. Voltage No Load On Load
Operating
Range
Nominal
Voltage
Present Pace Recent Torque Pace
V V A r/min A kg·cm r/min
one/14.nine KM-42F555-238-1223.seven 6.-twelve. twelve .22 382 1.six 3 316

All technical info can custom created for various application.

Personalized products:
DC motor, gearbox motor, vibration motor, automotive motor.
Equipment offered like encoder, gear,worm, wire, connector.
Ball bearing or Oil-impregnated bearing.
Shaft configuration(multi-knurls,D-lower condition, four-knurls and so forth).
Steel end cap or plastic finish cap.
 Precious metal brush/ carbon brush.
Technological information.

Comprehensive Images

Software

 

Certifications

Packaging & Transport

Business Profile

Our Advantages

FAQ

one.What type of motor do you provide?

Kinmore specializes in creating DC motors & gear motors with the diameter ranging from 6mm-80mm automotive motors and vibration motors are our energy region, too we also offer brushless motors.
 

two.What is actually the lead time for samples or mass generation?

Generally, it takes fifteen-25 times to create samples about mass manufacturing, it will get 35-40 days for DC motor generation and forty five-sixty times for gear motor creation.
 

three.Could you mind sending the quotation for this motor?

For all of our motors, they are tailored based on distinct needs. We will offer you the quotation shortly after you deliver your particular requests and annual amount.
 

4.Do you supply some sorts of components like encoder, PCB, connector, soldering wired for the motor?

We specialize in motors, instead of equipment. But if your annual need reaches a particular volume, we will apply to the engineer for providing the equipment.

five.Are your motors certificated with UL, CB Tüv, CE?

All of our motors are UL, CB Tüv, CE compliant, and all our products are producing underneath Attain and ROHS. We could give motor’s exploring drawing and BOM for your goods UL certificated. We also could make motors developed-in filters based on your EMC directive for your EMC passing.

US $8
/ Piece
|
1,000 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Low Speed
Excitation Mode: Excited
Function: Control, Driving
Casing Protection: Open Type
Number of Poles: 4

###

Customization:

###

Ratio Model No. Voltage No Load On Load
Operating
Range
Nominal
Voltage
Current Speed Current Torque Speed
V V A r/min A kg·cm r/min
1/14.9 KM-42F555-238-1223.7 6.0-12.0 12 0.22 382 1.6 3 316
US $8
/ Piece
|
1,000 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Low Speed
Excitation Mode: Excited
Function: Control, Driving
Casing Protection: Open Type
Number of Poles: 4

###

Customization:

###

Ratio Model No. Voltage No Load On Load
Operating
Range
Nominal
Voltage
Current Speed Current Torque Speed
V V A r/min A kg·cm r/min
1/14.9 KM-42F555-238-1223.7 6.0-12.0 12 0.22 382 1.6 3 316

Choosing a Gearbox For Your Application

The gearbox is an essential part of bicycles. It is used for several purposes, including speed and force. A gearbox is used to achieve one or both of these goals, but there is always a trade-off. Increasing speed increases wheel speed and forces on the wheels. Similarly, increasing pedal force increases the force on the wheels. This makes it easier for cyclists to accelerate their bicycles. However, this compromise makes the gearbox less efficient than an ideal one.
gearbox

Dimensions

Gearboxes come in different sizes, so the size of your unit depends on the number of stages. Using a chart to determine how many stages are required will help you determine the dimensions of your unit. The ratios of individual stages are normally greater at the top and get smaller as you get closer to the last reduction. This information is important when choosing the right gearbox for your application. However, the dimensions of your gearbox do not have to be exact. Some manufacturers have guides that outline the required dimensions.
The service factor of a gearbox is a combination of the required reliability, the actual service condition, and the load that the gearbox will endure. It can range from 1.0 to 1.4. If the service factor of a gearbox is 1.0, it means that the unit has just enough capacity to meet your needs, but any extra requirements could cause the unit to fail or overheat. However, service factors of 1.4 are generally sufficient for most industrial applications, since they indicate that a gearbox can withstand 1.4 times its application requirement.
Different sizes also have different shapes. Some types are concentric, while others are parallel or at a right angle. The fourth type of gearbox is called shaft mount and is used when mounting the gearbox by foot is impossible. We will discuss the different mounting positions later. In the meantime, keep these dimensions in mind when choosing a gearbox for your application. If you have space constraints, a concentric gearbox is usually your best option.

Construction

The design and construction of a gearbox entails the integration of various components into a single structure. The components of a gearbox must have sufficient rigidity and adequate vibration damping properties. The design guidelines note the approximate values for the components and recommend the production method. Empirical formulas were used to determine the dimensions of the various components. It was found that these methods can simplify the design process. These methods are also used to calculate the angular and axial displacements of the components of the gearbox.
In this project, we used a 3D modeling software called SOLIDWORKS to create a 3-D model of a gear reducer. We used this software to simulate the structure of the gearbox, and it has powerful design automation tools. Although the gear reducer and housing are separate parts, we model them as a single body. To save time, we also removed the auxiliary elements, such as oil inlets and oil level indicators, from the 3D model.
Our method is based on parameter-optimized deep neural networks (DBNs). This model has both supervised and unsupervised learning capabilities, allowing it to be self-adaptive. This method is superior to traditional methods, which have poor self-adaptive feature extraction and shallow network generalization. Our algorithm is able to recognize faults in different states of the gearbox using its vibration signal. We have tested our model on two gearboxes.
With the help of advanced material science technologies, we can now manufacture the housing for the gearbox using high-quality steel and aluminium alloys. In addition, advanced telematics systems have increased the response time of manufacturers. These technologies are expected to create tremendous opportunities in the coming years and fuel the growth of the gearbox housing market. There are many different ways to construct a gearbox, and these techniques are highly customizable. In this study, we will consider the design and construction of various gearbox types, as well as their components.
gearbox

Working

A gearbox is a mechanical device that transmits power from one gear to another. The different types of gears are called planetary gears and are used in a variety of applications. Depending on the type of gearbox, it may be concentric, parallel, or at a right angle. The fourth type of gearbox is a shaft mount. The shaft mount type is used in applications that cannot be mounted by foot. The various mounting positions will be discussed later.
Many design guidelines recommend a service factor of 1.0, which needs to be adjusted based on actual service conditions. This factor is the combined measure of external load, required reliability, and overall gearbox life. In general, published service factors are the minimum requirements for a particular application, but a higher value is necessary for severe loading. This calculation is also recommended for high-speed gearboxes. However, the service factor should not be a sole determining factor in the selection process.
The second gear of a pair of gears has more teeth than the first gear. It also turns slower, but with greater torque. The second gear always turns in the opposite direction. The animation demonstrates this change in direction. A gearbox can also have more than one pair of gears, and a first gear may be used for the reverse. When a gear is shifted from one position to another, the second gear is engaged and the first gear is engaged again.
Another term used to describe a gearbox is “gear box.” This term is an interchangeable term for different mechanical units containing gears. Gearboxes are commonly used to alter speed and torque in various applications. Hence, understanding the gearbox and its parts is essential to maintaining your car’s performance. If you want to extend the life of your vehicle, be sure to check the gearbox’s efficiency. The better its functioning, the less likely it is to fail.

Advantages

Automatic transmission boxes are almost identical to mechanical transmission boxes, but they also have an electronic component that determines the comfort of the driver. Automatic transmission boxes use special blocks to manage shifts effectively and take into account information from other systems, as well as the driver’s input. This ensures accuracy and positioning. The following are a few gearbox advantages:
A gearbox creates a small amount of drag when pedaling, but this drag is offset by the increased effort to climb. The external derailleur system is more efficient when adjusted for friction, but it does not create as little drag in dry conditions. The internal gearbox allows engineers to tune the shifting system to minimize braking issues, pedal kickback, and chain growth. As a result, an internal gearbox is a great choice for bikes with high-performance components.
Helical gearboxes offer some advantages, including a low noise level and lower vibration. They are also highly durable and reliable. They can be extended in modular fashion, which makes them more expensive. Gearboxes are best for applications involving heavy loads. Alternatively, you can opt for a gearbox with multiple teeth. A helical gearbox is more durable and robust, but it is also more expensive. However, the benefits far outweigh the disadvantages.
A gearbox with a manual transmission is often more energy-efficient than one with an automatic transmission. Moreover, these cars typically have lower fuel consumption and higher emissions than their automatic counterparts. In addition, the driver does not have to worry about the brakes wearing out quickly. Another advantage of a manual transmission is its affordability. A manual transmission is often available at a lower cost than its automatic counterpart, and repairs and interventions are easier and less costly. And if you have a mechanical problem with the gearbox, you can control the fuel consumption of your vehicle with appropriate driving habits.
gearbox

Application

While choosing a gearbox for a specific application, the customer should consider the load on the output shaft. High impact loads will wear out gear teeth and shaft bearings, requiring higher service factors. Other factors to consider are the size and style of the output shaft and the environment. Detailed information on these factors will help the customer choose the best gearbox. Several sizing programs are available to determine the most appropriate gearbox for a specific application.
The sizing of a gearbox depends on its input speed, torque, and the motor shaft diameter. The input speed must not exceed the required gearbox’s rating, as high speeds can cause premature seal wear. A low-backlash gearbox may be sufficient for a particular application. Using an output mechanism of the correct size may help increase the input speed. However, this is not recommended for all applications. To choose the right gearbox, check the manufacturer’s warranty and contact customer service representatives.
Different gearboxes have different strengths and weaknesses. A standard gearbox should be durable and flexible, but it must also be able to transfer torque efficiently. There are various types of gears, including open gearing, helical gears, and spur gears. Some of the types of gears can be used to power large industrial machines. For example, the most popular type of gearbox is the planetary drive gearbox. These are used in material handling equipment, conveyor systems, power plants, plastics, and mining. Gearboxes can be used for high-speed applications, such as conveyors, crushers, and moving monorail systems.
Service factors determine the life of a gearbox. Often, manufacturers recommend a service factor of 1.0. However, the actual value may be higher or lower than that. It is often useful to consider the service factor when choosing a gearbox for a particular application. A service factor of 1.4 means that the gearbox can handle 1.4 times the load required. For example, a 1,000-inch-pound gearbox would need a 1,400-inch-pound gearbox. Service factors can be adjusted to suit different applications and conditions.

China Kinmore 24V Gear Motor Volt Small DC Gearbox with Diameter 37mm for Charging Robot     automatic gearbox	China Kinmore 24V Gear Motor Volt Small DC Gearbox with Diameter 37mm for Charging Robot     automatic gearbox
editor by czh 2023-01-01

S shop himpo Gearbox High supplier -Precision Vrb-115c for Gantry Robot Servo Motor Reducer

Product Description

Product Parameters

Our Advantages

The company has stocks of some commonly used models, and we solemnly promise that the Shimpo reducers sold are brand new and original, with a one-year warranty

FAQ

1. How to choose a suitable reducer for the servo motor?
A: Please tell us the size of the matching servo motor, how much torque you need to increase through the reducer, and the application scenario, we can choose the most suitable one for you;

2. How do we know the product quality?
A: The products we sell are guaranteed for one year. CZPT y product has undergone strict quality inspection before leaving the factory. In addition, you can send us an email to get detailed photos to check if you can’t get enough information on the product page.

3. Is this your final price? Can you give me a discount?
Answer: Our price is the ex-factory price. If your quantity is larger, we will provide you with a discount.

4. How CZPT is your delivery time?
A: If the goods are in stock, it is usually 3-5 days. Or if the goods are not in stock, it depends on the quantity required, usually 5-10 days. If the delivery time is more urgent, please communicate with us as soon as possible to expedite the processing.

 

in Rasht Iran (Islamic Republic of) sales price shop near me near me shop factory supplier Robot permanent magnet DC worm gear mini electric motor manufacturer best Cost Custom Cheap wholesaler

  in Rasht Iran (Islamic Republic of)  sales   price   shop   near me   near me shop   factory   supplier Robot permanent magnet DC worm gear mini electric motor manufacturer   best   Cost   Custom   Cheap   wholesaler

In 2008, it was awarded with “Countrywide Export Commodity Inspection-free Enterprise”. Because of to our sincerity in supplying very best provider to our consumers, comprehension of your wants and overriding sense of obligation toward filling buying specifications, we supply chromed bar and tubes for hydualic and pheumatic cylinders.

Robotic everlasting magnet dc worm EPT mini electrical motor

DC motor Principal Characteristics
1.OEM/ODM 40x58mm morm EPTT furthermore 555PM long lasting magnet DC motor amp 36mm brushless motor
two.Little measurement dc EPT motor with low velocity and large torque
3.40x58mm EPT motor provide two.0Nm torque and much more reputable
four.Suitable to modest diameter, reduced sounds and massive torque application
five.DC EPT motor can match encoder,11ppr
6.Reduction ratio:eighty one,one hundred thirty five,207,405,621

EPT product no. Rated voltage No-load pace No-load existing Rated speed Rated torque Rated existing Output EPTT Stall torque Stall present
VDC r/min mA r/min g.cm mA W g.cm A
TRS-555PM-1233 12 3300 two hundred 2800 two hundred 1000 five.seven 1150 5.5
TRS-555PM-1260 12 6000 300 5250 290 2400 16 2200 fifteen
TRS-555PM-2440 24 4000 a hundred and fifty 3150 200 seven hundred six.four 1000 two.7

EPT motor technical info : TWG4058-555PM-1233-xxx

Reduction ratio eighty one a hundred thirty five 207 405 621
Duration mm fifty eight 58 58 58 fifty eight
No-load velocity rpm 38 24 sixteen eight 5
Rated velocity rpm 34 21 fourteen seven five
Rated torque kg.cm 10 19 twenty 20 twenty
Max.momentary tolerance torque kg.cm thirty thirty 30 thirty thirty

EPT motor specialized info : TWG4058-555PM-1260-xxx

Reduction ratio 81 135 207 405 621
Length mm 58 58 fifty eight 58 fifty eight
No-load velocity rpm 70 43 29 fifteen ten
Rated velocity rpm sixty five 39 26 14 nine
Rated torque kg.cm sixteen 20 20 20 20
Max.momentary tolerance torque kg.cm thirty 30 thirty thirty 30

EPT motor complex data : TWG4058-555PM-2440-xxx

Reduction ratio eighty one 135 207 405 621
Size mm fifty eight fifty eight fifty eight 58 fifty eight
No-load velocity rpm 47 24 19 10 six
Rated speed rpm 39 21 16 eight five
Rated torque kg.cm ten 19 twenty twenty 20
Max.momentary tolerance torque kg.cm 30 30 30 30 thirty

Solution Software
EPTs or doors electric powered locks, micro hoist, XiHu (West EPT) Dis.Hu (West EPT) Dis.bage disposal, drinking water IC Playing cards, toEPTTand EPTs, figer – electronic locks, optical products,
Card EPTT, robotic, towel EPTT, workplace products, EPTT EPTs, automatic actuator,and many others.

Relevant solution

EPTT amp Delivery
EPTT: single carton EPTT, a hundred items for every box.
EPT time
:
DHL: 3-five functioning daEPTT
UPS: 5-7 operating days
TNT: 5-7 operating times
FedEx: 7-nine operating times
EMS: twelve-fifteen operating days
By Sea: Depends on which country

Our EPTT

TT EPT (HK) EPTT EPTT, Ltd has been EPTTizing in micro motors, EPT motors and their respective areas given that 2000.
Our merchandise are widely utilised in EPTTrtainment techniques, cars, house and EPTT EPTs and instruments and numerous others. Our items are reliable and EPTT-long lasting, and backed by many years of experience. We export ninety eight% of our output worldwide.
By EPTaging our difficult-received popularity for honesty, dependability and quality, TT EPT aims to proceed as a pioneer in the product sales overEPTT by seeking EPTT partners. If your firm is an conclude-consumer of micro-motors, a distributor or an agent, remember to make contact with us. We search EPTT to getting in a position to operate with each other with you in the near EPT.

Certifications

FAQ

Q: How to purchase?
A: deliver us inquiry #8594 EPT our quotation #8594 negotiate information #8594 validate the sample #8594 sign agreement/deposit #8594 mass creation #8594 cargo prepared #8594 equilibrium/supply #8594 even more cooperation.
Q: How about Sample get?
A: Sample is offered for you. you should make contact with us for details. Speak to us
Q: Which delivery way is avaliable?
A: DHL, UPS, FedEx, TNT, EMS, EPTT Post,Sea are obtainable.The other delivery waEPTTare also offered, you should speak to us if you require ship by the other transport way.
Q: How EPTT is the provide?
A: Devliver time relies upon on the amount you buy. generally it normally takes 15-twenty five doing work days.
Q: My package deal has lacking items. What can I do?
A: Remember to speak to our assistance group and we will affirm your orEPTTwith the deal contents.We apologize for any inconveniences.
Q: How to verify the payment?
A: We settle for payment by T/T, PayPal, the other payment waEPTTalso could be acknowledged,Please contact us prior to you pay by the other payment approaches. Also thirty-fifty% deposit is offered, the harmony cash should be paid prior to shipping and delivery.

  in Rasht Iran (Islamic Republic of)  sales   price   shop   near me   near me shop   factory   supplier Robot permanent magnet DC worm gear mini electric motor manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Rasht Iran (Islamic Republic of)  sales   price   shop   near me   near me shop   factory   supplier Robot permanent magnet DC worm gear mini electric motor manufacturer   best   Cost   Custom   Cheap   wholesaler

in Riyadh Saudi Arabia sales price shop near me near me shop factory supplier Education Robot Kits Car Toy Use Wheel for Small Plastic DC Gear Motor Smart Car Motor Robot Wheel manufacturer best Cost Custom Cheap wholesaler

  in Riyadh Saudi Arabia  sales   price   shop   near me   near me shop   factory   supplier Education Robot Kits Car Toy Use Wheel for Small Plastic DC Gear Motor Smart Car Motor Robot Wheel manufacturer   best   Cost   Custom   Cheap   wholesaler

we are confident to give our customers flexible and diversified solutions. More importantly, we make unique areas according to equipped drawings/samples and warmly welcome OEM inquiries. Fantastic attention has been compensated on environmental security and power conserving.

EPT Robot Kits car Toy Use Wheel for Small Plastic DC EPT motor

Specification:

DC motor Wheel Match Constant Rotation one hundred thirty DC EPT EPT Box
Description
This DC motor wheel from EPT unique deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment, it is made to match all one hundred thirty DC motors
The diameter of the wheel is 60MM, modest and light-weight,
This wheel is mainly utilised in Steam training and robotics for young children.
It has a velocity measurinEPTTesting operate.
The wheel has presently been drilled into the disc gap.
This wheel has two functions.
1 is the wheel perform and the other is the code disk function.
The wheel is molded from Ab muscles and measures just unEPTT50mm throughout by 7mm.
With the incEPTTd rubber EPT tire, the whole wheel diameter is 51mm.
Quick Spec:
-Really substantial good quality
-50mm Wheel Diameter
-7mm Tyre Width
-Splines suitable with all 130 DC motors

  in Riyadh Saudi Arabia  sales   price   shop   near me   near me shop   factory   supplier Education Robot Kits Car Toy Use Wheel for Small Plastic DC Gear Motor Smart Car Motor Robot Wheel manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Riyadh Saudi Arabia  sales   price   shop   near me   near me shop   factory   supplier Education Robot Kits Car Toy Use Wheel for Small Plastic DC Gear Motor Smart Car Motor Robot Wheel manufacturer   best   Cost   Custom   Cheap   wholesaler

6W~400W 12W~48V Electrical DC Brushless Motor for Robot Using

6W~400W 12W~48V Electrical DC Brushless Motor for Robot Using

Introduction
Reversible motor has a friction brake at the again of the motor human body, which is created for applications the place reversal of course is often needed. The reversible motor is like induction motor that commenced by the capacitor and has a identical torque attribute with the induction motor. But the reversible motor is designed with a higher commencing torque to boost the immediate reversal features.
Specification

Firm Overview
Greensky Electricity Firm Limited is a China based global business who is specialized in electric motor, gearbox and controlling method creating, production, quality controlling and buying and selling.

Mission:
We are devoted to develop an global electric motor firm who can deliver one particular-end trustworthy items with consumer-oriented service.

History:
Greensky was recognized in 2571 by York Cheng in Los Angeles, United states and moved to HangZhou, China in 2011. In the previous eight a long time, the group of Greensky carries on to produce the benefit to our esteemed customers all over the entire world by building up vast and reliable supply chain administration system, powerful quality & supply time control method, cost performance production  system and quick-answer professional provider.

Spot: 
Xihu (West Lake) Dis. district, HangZhou, China
Xihu (West Lake) Dis. is a higher-tech zone which is the center of oversea Chinese expertise business people. Some CZPT neighbours contain Alibaba, Netease and Geely corporation.

Track record:
Greensky is a subsidiary of CZPTEye Funds Restricted who has 3 manufacturing vegetation and one revenue workplace with far more than 500 staff and all round two hundred million income.

Greensky Overseas Exhibitions:

Greensky Certificates:

FAQ

1 Q: What is your MOQ?
   A: 1unit is alright for distinct kinds. 

2 Q: What about your guarantee?
   A: A single calendar year.

three Q: Do you offer OEM support with client-symbol?
   A: Indeed, we could do OEM orders, but we mainly concentrate on our possess brand.

four Q: How about your payment phrases ?
   A: TT, western union and paypal. one hundred% payment in innovative for orders much less $5,000. thirty% deposit and balance ahead of delivery for orders above $5,000.

5 Q: How about your packing ?
   A: Carton, Plywood case. If you need to have a lot more, we can pack all goods with pallet 

six Q: What details should be provided, if I get from you ?
   A: Rated electricity, gearbox ratio, enter speed, mounting situation. Far more information, better!

7 Q: How do you deliver the get?
   A: We will assess and choose the most appropriate methods of shipping and delivery by sea, air or convey courier.

Warmly welcome your inquiries !

 

6W~400W 12W~48V Electrical DC Brushless Motor for Robot Using

25W 42mm Planetary DC Motor for Robot Using

25W 42mm Planetary DC Motor for Robot Using

Introduction
Brushless DC motor (BLDC) is created up of motor and driver, which is a kind of typical solution of mechanical and electrical and electrical integration.It is higher regarded by market as its modest volume, minimal noise, higher effectiveness, wide variety of speed control and regular doing work condition with less inaccuracy.
 
Look at Of Product
Firm OVERVIEW

About Greensky Electrical power
History:Greensky Electrical power Co.,ltd was established in Los Angeles in 2008 and has targeted on manufacturing and supplying the renewable products and factors for 8 years because 2008.
Market:Greensky Electricity has buyers in thirty various countries.Germany, Austria, Japan, United states and Center-CZPT are our principal industry.
Honors:Greensky Power is member of a council in ZHangZhoug Solar Association which is the biggest renewable vitality affiliation in CZPT of China.
 
 
 

Model Voltage
V
Rated Power
W
Rated Current
A
Rated Speed
RPM
Rated Torque
N.m
Grade CZPT
IP
42BLDP2430-30S 24 thirty 1.75 3000 .09 32
42BLDP2430-30S 24 35 2. 3000 .eleven 32

Company Overview

Greensky Electricity Firm Limited is a China primarily based worldwide organization who is specialised in electrical motor, gearbox and controlling technique establishing, production, good quality controlling and buying and selling.

Mission:
We are committed to build an global electrical motor business who can provide one particular-end reputable merchandise with buyer-oriented services.

History:
Greensky was recognized in 2571 by York Cheng in Los Angeles, Usa and moved to HangZhou, China in 2011. In the earlier eight several years, the team of Greensky proceeds to create the price to our esteemed customers all over the planet by developing up vast and dependable provide chain management system, efficient high quality & shipping and delivery time management system, expense efficiency manufacturing  system and quick-respond skilled service.

Place: 
Xihu (West Lake) Dis. district, HangZhou, China
Xihu (West Lake) Dis. is a high-tech zone which is the middle of oversea Chinese expertise business owners. Some CZPT neighbours contain Alibaba, Netease and Geely corporation.

History:
Greensky is a subsidiary of CZPTEye Capital Constrained who has three production plants and one income workplace with more than 500 employees and general 200 million income.

Greensky Overseas Exhibitions

Greensky Certificates:

FAQ

1 Q: What’s your MOQ?
   A: 1unit is alright for diverse sorts. 

two Q: What about your guarantee?
   A: A single calendar year.

three Q: Do you give OEM provider with consumer-brand?
   A: Yes, we could do OEM orders, but we mainly target on our personal brand.

four Q: How about your payment conditions ?
   A: TT, western union and paypal. one hundred% payment in sophisticated for orders much less $5,000. 30% deposit and balance prior to delivery for orders more than $five,000.

five Q: How about your packing ?
   A: Carton, Plywood situation. If you require much more, we can pack all goods with pallet 

6 Q: What info need to be provided, if I get from you ?
   A: Rated electrical power, gearbox ratio, enter pace, mounting place. Far more particulars, far better!

seven Q: How do you deliver the buy?
   A: We will compare and choose the most suited methods of delivery by sea, air or categorical courier.

Warmly welcome your inquiries !

25W 42mm Planetary DC Motor for Robot Using