Product Description
NMRV040 Agricultural Industrial Machinery Conveyor Ships Concrete Mixer High Torque Gear Small Planetary Gearbox For NMRV Worm Reducers
Our Gearbox has many items for your choosing and we can produce as per your drawing or sample to meet your special request
1. Large output torque
2. Safe, reliable, economical and durable
3. Stable transmission, quiet operation
4. High carrying ability
5. High modularization design, may equip with various outer power input conveniently. Same machine type may equip with various power motor. It is easy to realize the combination and junction between every machine type
6. Transmission ratio: Fine division, wide scope. The combined machine type may form very large transmission ratio, i. E. Output very low rotary speed.
7. Form of installation: The position to be installed is not limited.
8. High strength, compact the box body of high strength cast iron, gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unit volume is high.
9. Long life: Under the condition of correct type chosen(including choosing suitable operation parament ) normal operation and maintenance, the life if main parts speed reducer(except wearing parts)should not be less than 20000 hours. The wearing parts include lubricating oil, oil seal and bearing.
10. Low noise: Because main parts of speed reducer are processed, and tested critically, therefore the noise of speed reducer is low.
11.Our gear box have reached the advance international level, can replace the same kind of products imported.
HangZhou CHINAMFG Industry Co., Ltd. is a specialized supplier of a full range of chains, sprockets, gears, gear racks, gearbox, v belt pulley, timing pulley, V-belts, couplings, machined parts and so on.
Due to our CHINAMFG in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets.Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.
With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.
Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Motor, Machinery, Marine, Agricultural Machinery |
---|---|
Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
Layout: | Coaxial |
Customization: |
Available
| Customized Request |
---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
|
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Customization of Industrial Gearboxes for Specific Industrial Needs
Yes, industrial gearboxes can be customized to meet specific industrial needs and requirements. Manufacturers offer customization options to ensure that the gearbox design and specifications align with the unique demands of different applications:
1. Gear Ratio: Industrial gearboxes can be customized to achieve specific gear ratios, allowing precise control over speed reduction or increase according to the application’s requirements.
2. Torque Capacity: Gearboxes can be designed with varying torque capacities to handle different levels of load and stress in heavy-duty applications.
3. Mounting Configurations: Gearboxes can be customized with different mounting options, such as flange or shaft-mounted designs, to fit seamlessly into the existing machinery.
4. Lubrication: Manufacturers can tailor the lubrication system of the gearbox to suit the operating conditions and environmental factors of the specific application.
5. Materials and Coatings: Industrial gearboxes can be customized with specific materials and coatings to enhance corrosion resistance, wear resistance, and durability.
6. Accessories and Features: Customizable features may include input and output shaft configurations, enclosures, cooling systems, and additional accessories to optimize performance.
7. Noise and Vibration Control: Custom designs can incorporate features to reduce noise and vibration, ensuring quieter and smoother operation.
8. Integration with Control Systems: Gearboxes can be customized to seamlessly integrate with control systems and automation technologies.
Manufacturers work closely with customers to understand their unique requirements and tailor industrial gearboxes accordingly. Customization ensures that the gearbox effectively addresses the specific challenges and demands of various industries, enhancing overall system performance and efficiency.
Drawbacks and Limitations of Industrial Gearbox Systems
While industrial gearbox systems offer numerous benefits, they also come with certain drawbacks and limitations:
1. Size and Weight: Industrial gearboxes can be large and heavy, which may require additional space and structural support in machinery design.
2. Efficiency Loss: Gearboxes can introduce energy losses due to friction and heat generation, especially in applications with high-speed rotations.
3. Maintenance Requirements: Gearboxes need regular maintenance to ensure optimal performance, including lubrication, gear inspections, and potential replacement of worn components.
4. Cost: The design, manufacturing, and installation of industrial gearbox systems can be expensive, especially for custom or specialized solutions.
5. Noise and Vibration: Gearboxes can generate noise and vibration, which may require additional measures for noise reduction and vibration damping.
6. Limited Operating Range: Each gearbox has a specific torque and speed range where it operates efficiently. Operating outside these limits can lead to reduced performance and potential damage.
Despite these limitations, industrial gearbox systems remain essential components in many industries due to their ability to efficiently transmit power, control motion, and adapt to various applications.
Types of Industrial Gearboxes and Their Functions
Industrial gearboxes come in various types, each designed for specific functions and applications. Here are some common types of industrial gearboxes and their functions:
- Helical Gearbox: Helical gearboxes have helical gears that provide smooth and quiet operation. They are suitable for applications requiring high efficiency and moderate to high torque transmission.
- Bevel Gearbox: Bevel gearboxes have bevel gears that transmit power between intersecting shafts at different angles. They are used in applications such as right-angle power transmission.
- Worm Gearbox: Worm gearboxes consist of a worm gear and a worm wheel. They offer high reduction ratios and are commonly used for applications where precise speed reduction is required.
- Planetary Gearbox: Planetary gearboxes feature planetary gears arranged around a central sun gear. They offer high torque density and are used in applications requiring compact size and high efficiency.
- Spur Gearbox: Spur gearboxes have straight-cut teeth and are suitable for applications with parallel shafts. They offer simple and cost-effective power transmission.
- Parallel Shaft Gearbox: Parallel shaft gearboxes transmit power between parallel shafts. They are versatile and used in a wide range of industrial applications.
- Right-Angle Gearbox: Right-angle gearboxes transmit power between shafts that are positioned at a 90-degree angle. They are used when space constraints or specific configurations require such an arrangement.
- Helical-Bevel Gearbox: Helical-bevel gearboxes combine the features of helical and bevel gearboxes, offering both efficiency and the ability to handle right-angle power transmission.
- Helical-Worm Gearbox: Helical-worm gearboxes combine helical and worm gearsets. They provide high reduction ratios and are suitable for applications requiring high torque and moderate efficiency.
Each type of industrial gearbox has its own unique characteristics and functions, making them suitable for specific industrial tasks and requirements.
editor by CX 2024-05-15
China Best Sales Wps 40 50 60 70 80 100 120 135 147 155 175 200 250 Industrial Transmission Helical Bevel Gear Motor Concrete Mixer Small Planetary Gearbox for Metallurgy supplier
Product Description
WPS 250 Industrial Transmission Helical Bevel Gear Motor Concrete Mixer Small Planetary Gearbox For Metallurgy
Our Gearbox has many items for your choosing and we can produce as per your drawing or sample to meet your special request
1. Large output torque
2. Safe, reliable, economical and durable
3. Stable transmission, quiet operation
4. High carrying ability
5. High modularization design, may equip with various outer power input conveniently. Same machine type may equip with various power motor. It is easy to realize the combination and junction between every machine type
6. Transmission ratio: Fine division, wide scope. The combined machine type may form very large transmission ratio, i. E. Output very low rotary speed.
7. Form of installation: The position to be installed is not limited.
8. High strength, compact the box body of high strength cast iron, gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unit volume is high.
9. Long life: Under the condition of correct type chosen(including choosing suitable operation parament ) normal operation and maintenance, the life if main parts speed reducer(except wearing parts)should not be less than 20000 hours. The wearing parts include lubricating oil, oil seal and bearing.
10. Low noise: Because main parts of speed reducer are processed, and tested critically, therefore the noise of speed reducer is low.
11.Our gear box have reached the advance international level, can replace the same kind of products imported.
HangZhou CHINAMFG Industry Co., Ltd. is a specialized supplier of a full range of chains, sprockets, gears, gear racks, gearbox, v belt pulley, timing pulley, V-belts, couplings, machined parts and so on.
Due to our CHINAMFG in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets.Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.
With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.
Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Motor, Machinery, Marine, Agricultural Machinery |
---|---|
Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
Layout: | Coaxial |
Customization: |
Available
| Customized Request |
---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
|
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Real-World Examples of Industrial Gearbox Applications
Industrial gearbox technology finds widespread use in a diverse range of products and applications across various industries. Some real-world examples include:
1. Wind Turbines: Industrial gearboxes are integral components in wind turbines, where they transmit the rotational energy of the wind turbine’s blades to the generator at an optimal speed to produce electricity.
2. Conveyor Systems: Gearboxes are used in conveyor systems to control the speed and direction of material handling, ensuring efficient movement of goods in industries like manufacturing, logistics, and mining.
3. Mining Equipment: Heavy-duty machinery in the mining industry, such as crushers, excavators, and loaders, rely on industrial gearboxes for torque multiplication and efficient power transmission.
4. Construction Machinery: Cranes, excavators, and concrete mixers utilize industrial gearboxes to manage heavy loads and perform precise movements in construction projects.
5. Marine Propulsion: Ships and vessels use gearboxes in their propulsion systems to convert the high-speed rotation of the engines into the lower-speed rotation needed by the propellers.
6. Automotive Industry: Gearboxes are found in vehicles to transmit power from the engine to the wheels, enabling speed variation and torque multiplication.
7. Food Processing: Industrial gearboxes play a role in various stages of food processing, such as mixing, grinding, and packaging, ensuring efficient and controlled movement of ingredients and products.
8. Paper and Pulp Industry: Gearboxes are used in paper mills for processes like pulping, refining, and paper machine operations, where precise control and torque management are essential.
9. Steel and Metal Processing: Gearboxes are vital in metal processing equipment like rolling mills and extruders, enabling the shaping and forming of metals at varying speeds and forces.
10. Textile Machinery: In textile manufacturing, industrial gearboxes are employed in machines for spinning, weaving, and knitting, facilitating the intricate movements required for fabric production.
11. Agriculture: Tractors and other agricultural machinery utilize gearboxes to control the speed and power required for tasks such as plowing, tilling, and harvesting.
12. Renewable Energy: Beyond wind turbines, industrial gearboxes are used in other renewable energy systems like hydroelectric power plants and solar tracking mechanisms.
These examples showcase the versatility and importance of industrial gearbox technology in various sectors, where they enable efficient power transmission, motion control, and the reliable operation of critical machinery.
Efficient Power Distribution and Motion Control with Industrial Gearboxes
Industrial gearboxes play a crucial role in ensuring efficient power distribution and precise motion control within mechanical systems. Here’s how they achieve these functions:
- Power Transmission: Industrial gearboxes efficiently transfer power from the input shaft to the output shaft through a series of gears with different tooth configurations. The gears mesh and transmit torque, allowing power to be distributed and converted at the desired speed and torque levels.
- Gear Ratio Selection: By choosing appropriate gear ratios, industrial gearboxes enable the adjustment of output speed and torque according to the application’s requirements. This flexibility allows for efficient power distribution based on specific operational needs.
- Reduction of Speed: In cases where high-speed input needs to be converted into low-speed output with increased torque, gearboxes use gear reduction to achieve the desired motion control. This is particularly beneficial for heavy-duty applications requiring precision and controlled movement.
- Increase in Torque: Conversely, industrial gearboxes can increase torque while reducing speed, which is valuable for applications requiring high force output, such as heavy lifting or material processing.
- Motion Control: Gearboxes provide precise control over the motion of machinery by adjusting speed and torque. This is essential for tasks that demand accurate positioning, synchronization, and coordination of components.
- Directional Changes: Some gearbox designs, such as bevel or worm gearboxes, enable changes in motion direction. This capability is crucial for applications involving complex motion patterns or reversing movements.
- Consistency and Reliability: Industrial gearboxes ensure consistent power distribution and motion control over prolonged periods, contributing to the reliability and stability of mechanical systems.
Overall, industrial gearboxes optimize power distribution and motion control, enhancing the efficiency, accuracy, and performance of various machinery and equipment across different industries.
Benefits of Using an Industrial Gearbox in Heavy-Duty Applications
An industrial gearbox offers several benefits when used in heavy-duty applications, where robust and reliable power transmission is essential:
- High Torque Handling: Industrial gearboxes are designed to handle high levels of torque, making them well-suited for heavy-duty tasks that require substantial force and power.
- Durability and Longevity: Heavy-duty gearboxes are constructed from rugged materials and designed to withstand harsh operating conditions, ensuring extended service life and reduced maintenance requirements.
- Load Distribution: Gearboxes distribute the load across multiple gears, reducing the strain on individual components and promoting even wear, which is crucial in heavy-duty applications.
- Efficient Power Transmission: Industrial gearboxes efficiently transmit power between input and output shafts, ensuring minimal power loss and maximizing overall system efficiency.
- Flexibility in Speed and Torque: Heavy-duty gearboxes offer the flexibility to adjust speed and torque by selecting appropriate gear ratios, allowing for precise control over machinery performance.
- Adaptability to Varying Conditions: Industrial gearboxes can adapt to changing load conditions, making them suitable for applications with fluctuating requirements.
- Reduced Downtime: The durability and reliability of industrial gearboxes contribute to reduced downtime and increased operational uptime, enhancing productivity.
- Customization: Gearboxes can be customized to meet specific heavy-duty application needs, ensuring optimal performance and compatibility.
Overall, industrial gearboxes play a pivotal role in heavy-duty applications by providing robust power transmission, durability, and versatility to meet the demands of challenging tasks.
editor by CX 2024-04-26
China Best Sales Worm Drive Ship Industrial Speed Reduction Gearbox for Concrete Mixer Worm Gearbox for Concrete Mixer Machine supplier
Product Description
Best Price Liquid emulsifying homogenizer tank electric steam heating mixer jacketed stainless steel mixing tank with agitator | |||
Profile/type | Single layer tank | Double layer tank | Three layer tank |
material | SS304 or SS316L | ||
Volume | 50L-20T (Customized) | ||
Pressure | Vacuum-1Mpa | ||
Tank Type | Vertical type or Horizontal type | ||
Structure | one layer | Inner layer+jacket | inner layer+jacket+insulation |
Cooling way | No | ice water /cooling water | ice water /cooling water |
heating way | No | electric/steam heating | electric/steam heating |
Agitator type | No | low speed | High speed |
No | 0-200RPM | 960-3400RPM | |
PARTS DETAILS | 1.Quick open manhole / Pressure manhole | ||
2.Various types of CIP cleaners | |||
3.Sterile respirator | |||
4.Adjustable Legs | |||
5.Inlet and Outlet sanitary valve | |||
6.Thermometer (According to customer requirements ) | |||
7.Paddle blender .(According to customer requirements) | |||
8.Liquid level meter and lever controller (According to customer requirements) | |||
9.Ladder |
Application:
Used as blending tank,mixing tank,preparation tank fermentation tank and disinfection tank.
Ideal in fields such as food,dairy products,fruit juice beverages,pharmacy,chemical industry and biological engineering etc.
Model | Effective volume(L) | Dimension of tank (D*H)(mm) | Total Height(mm) | Motor power(kw) | Agitator speed(r/min) |
LNT-500 | 500 | Φ800×900 | 1700 | 0.55 |
63
|
LNT-1000 |
1000 | Φ1000×1200 | 2100 | 0.75 | |
LNT-2000 | 2000 | Φ1200×1500 | 2500 | 1.5 | |
LNT-3000 | 3000 | Φ1600×1500 | 2600 | 2.2 | |
LNT-4000 | 4000 | Φ1600×1850 | 2900 | 2.2 | |
LNT-5000 | 5000 | Φ1800×2000 | 3150 | 3 | |
LNT-6000 | 6000 | Φ1800×2400 | 3600 | 3 | |
LNT-8000 | 8000 | Φ2000×2400 | 3700 | 4 | |
LNT-10000 | 10000 | Φ2100×3000 | 4300 | 5.5 | |
We can customize the equipment according to customer requirements. |
Q1 | Are you trade or manufacturer? |
A |
We are a factory with an international sales company specialized in support for global distributors. |
Q2 | Can you provide instant technical consulting services? |
A | We are able to discuss technical details and offer suggestions over the phone in English. You can get the answers in minutes, instead of days. |
Q3 |
What’s the difference between Ready-To-Ship and Customized products? |
A |
Some of RTS standard products are in stock and ready to ship in 2-3 days. |
Q4 | What is the payment terms? |
A |
We accept Alibaba Trade Assurance Order, also can T/T and L/C. |
Q5 | How to choose the shipment way? |
A |
It is according to the order quantity, delivery time, costs and customs policy etc. (Or decide by customers) |
Q6 |
How about the after-sales service? |
A | Fast after-sales support. Our products have a one-year warranty and free permanent consulting services. |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Mixer Type: | Agitator |
---|---|
Working: | Blend |
Stirring Type: | Stir |
Application: | Liquid with Suspended Solids, Powder, Viscous Fluid, Liquid, Granules |
Certification: | CE, ISO, UL |
Application Area: | Food |
Samples: |
US$ 1000/Set
1 Set(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Emerging Trends in Industrial Gearbox Technology: Smart Features and More
The field of industrial gearbox technology is constantly evolving, with emerging trends that aim to enhance performance, efficiency, and functionality. One of the notable trends is the integration of smart features into industrial gearboxes:
- IoT Connectivity: Industrial gearboxes are becoming equipped with sensors and connectivity capabilities, enabling them to be part of the Internet of Things (IoT) ecosystem. This connectivity allows for real-time monitoring, data collection, and remote diagnostics, leading to predictive maintenance and improved overall equipment effectiveness.
- Condition Monitoring: Smart gearboxes utilize sensors to monitor various parameters such as temperature, vibration, and lubrication levels. By continuously monitoring these factors, manufacturers can detect potential issues early and take proactive measures to prevent downtime and unplanned maintenance.
- Remote Control and Adjustment: Some modern industrial gearboxes can be remotely controlled and adjusted through digital interfaces. This feature facilitates precise tuning of gearbox settings to optimize performance for specific tasks or changing production demands.
- Advanced Analytics: The data collected from smart gearboxes can be analyzed using advanced analytics tools. This analysis provides insights into gearbox performance, wear patterns, and trends, helping manufacturers make informed decisions about maintenance and process improvements.
- Energy Efficiency: Smart gearboxes may incorporate energy optimization algorithms that adjust power delivery based on real-time demand. This contributes to energy efficiency and cost savings, particularly in applications with variable load requirements.
- Digital Twins: The concept of digital twins, which involves creating virtual models of physical gearboxes, is gaining traction. Digital twins allow engineers to simulate and test different operating conditions and scenarios, aiding in design optimization and performance prediction.
These emerging trends in industrial gearbox technology reflect a shift toward more intelligent, connected, and efficient systems. By embracing smart features and leveraging digital capabilities, manufacturers can unlock new levels of productivity, reliability, and innovation in their operations.
Maintenance Practices for Extending the Lifespan of Industrial Gearboxes
Proper maintenance is essential for ensuring the longevity and reliable performance of industrial gearboxes. Here are some crucial maintenance practices to extend their lifespan:
- Lubrication: Regularly inspect and maintain the gearbox’s lubrication system. Use the recommended lubricants and ensure proper oil levels to minimize friction, reduce wear, and dissipate heat effectively.
- Temperature Monitoring: Keep track of the operating temperature of the gearbox using temperature sensors. Abnormal temperature increases can indicate issues such as inadequate lubrication or gear misalignment.
- Vibration Analysis: Implement vibration analysis techniques to detect potential problems early. Excessive vibration may signal misalignments, gear damage, or other issues that require attention.
- Visual Inspections: Conduct routine visual inspections of the gearbox for signs of oil leaks, corrosion, worn gears, or other visible abnormalities. Address any issues promptly to prevent further damage.
- Alignment Checks: Regularly check and adjust the alignment of the gearbox and connected components. Misalignments can lead to increased wear and reduced efficiency.
- Torque and Load Analysis: Monitor the gearbox’s torque and load conditions to ensure they remain within recommended limits. Excessive loads can accelerate wear and lead to premature failure.
- Seal Maintenance: Inspect and maintain seals to prevent contaminants from entering the gearbox and to retain lubricants. Damaged seals can lead to contamination and lubrication breakdown.
- Regular Cleaning: Keep the gearbox clean and free from debris, dust, and dirt. Cleanliness helps prevent abrasive particles from causing wear on gears and other components.
- Periodic Overhaul: Plan for scheduled gearbox overhauls to replace worn or damaged parts. Follow manufacturer guidelines and recommended intervals for these overhauls.
- Training and Documentation: Ensure that maintenance personnel receive proper training on gearbox maintenance and record all maintenance activities and findings. This documentation helps track the gearbox’s history and informs future maintenance decisions.
By adhering to these maintenance practices, industrial gearboxes can operate optimally, minimize downtime, and achieve their intended lifespan, contributing to the overall efficiency and reliability of the machinery they are a part of.
Industries Using Industrial Gearboxes
Industrial gearboxes play a crucial role in various industries, enabling efficient power transmission and motion control. Some of the industries that commonly utilize industrial gearboxes for their operations include:
- Manufacturing: Industrial gearboxes are used in manufacturing processes for tasks such as material handling, assembly lines, and machine tools.
- Automotive: Gearboxes are essential components in automotive manufacturing, used in transmissions, engines, and other critical systems.
- Construction: Construction machinery relies on gearboxes for tasks like lifting, excavating, and moving heavy materials.
- Mining: Mining equipment utilizes gearboxes for drilling, crushing, conveying, and other demanding operations.
- Energy: Power generation facilities, including wind turbines, hydroelectric plants, and fossil fuel power plants, use gearboxes for efficient energy conversion.
- Marine: Gearboxes are crucial in marine applications, such as ship propulsion systems and offshore equipment.
- Agriculture: Farming machinery, like tractors and harvesters, relies on gearboxes for various tasks like plowing, planting, and harvesting.
- Food and Beverage: Gearboxes are used in food processing and packaging equipment, ensuring precise and efficient production.
- Textile: The textile industry employs gearboxes in machinery for weaving, spinning, and fabric processing.
- Pulp and Paper: Gearboxes play a role in papermaking processes, including pulping, drying, and rolling.
These are just a few examples of industries that heavily rely on industrial gearboxes to optimize their operations and ensure the efficient functioning of their machinery and equipment.
editor by CX 2024-04-17
China OEM Worm Drive Ship Industrial Speed Reduction Gearbox for Concrete Mixer Worm Gearbox for Concrete Mixer Machine with Hot selling
Product Description
Best Price Liquid emulsifying homogenizer tank electric steam heating mixer jacketed stainless steel mixing tank with agitator | |||
Profile/type | Single layer tank | Double layer tank | Three layer tank |
material | SS304 or SS316L | ||
Volume | 50L-20T (Customized) | ||
Pressure | Vacuum-1Mpa | ||
Tank Type | Vertical type or Horizontal type | ||
Structure | one layer | Inner layer+jacket | inner layer+jacket+insulation |
Cooling way | No | ice water /cooling water | ice water /cooling water |
heating way | No | electric/steam heating | electric/steam heating |
Agitator type | No | low speed | High speed |
No | 0-200RPM | 960-3400RPM | |
PARTS DETAILS | 1.Quick open manhole / Pressure manhole | ||
2.Various types of CIP cleaners | |||
3.Sterile respirator | |||
4.Adjustable Legs | |||
5.Inlet and Outlet sanitary valve | |||
6.Thermometer (According to customer requirements ) | |||
7.Paddle blender .(According to customer requirements) | |||
8.Liquid level meter and lever controller (According to customer requirements) | |||
9.Ladder |
Application:
Used as blending tank,mixing tank,preparation tank fermentation tank and disinfection tank.
Ideal in fields such as food,dairy products,fruit juice beverages,pharmacy,chemical industry and biological engineering etc.
Model | Effective volume(L) | Dimension of tank (D*H)(mm) | Total Height(mm) | Motor power(kw) | Agitator speed(r/min) |
LNT-500 | 500 | Φ800×900 | 1700 | 0.55 |
63
|
LNT-1000 |
1000 | Φ1000×1200 | 2100 | 0.75 | |
LNT-2000 | 2000 | Φ1200×1500 | 2500 | 1.5 | |
LNT-3000 | 3000 | Φ1600×1500 | 2600 | 2.2 | |
LNT-4000 | 4000 | Φ1600×1850 | 2900 | 2.2 | |
LNT-5000 | 5000 | Φ1800×2000 | 3150 | 3 | |
LNT-6000 | 6000 | Φ1800×2400 | 3600 | 3 | |
LNT-8000 | 8000 | Φ2000×2400 | 3700 | 4 | |
LNT-10000 | 10000 | Φ2100×3000 | 4300 | 5.5 | |
We can customize the equipment according to customer requirements. |
Q1 | Are you trade or manufacturer? |
A |
We are a factory with an international sales company specialized in support for global distributors. |
Q2 | Can you provide instant technical consulting services? |
A | We are able to discuss technical details and offer suggestions over the phone in English. You can get the answers in minutes, instead of days. |
Q3 |
What’s the difference between Ready-To-Ship and Customized products? |
A |
Some of RTS standard products are in stock and ready to ship in 2-3 days. |
Q4 | What is the payment terms? |
A |
We accept Alibaba Trade Assurance Order, also can T/T and L/C. |
Q5 | How to choose the shipment way? |
A |
It is according to the order quantity, delivery time, costs and customs policy etc. (Or decide by customers) |
Q6 |
How about the after-sales service? |
A | Fast after-sales support. Our products have a one-year warranty and free permanent consulting services. |
Mixer Type: | Agitator |
---|---|
Working: | Blend |
Stirring Type: | Stir |
Application: | Liquid with Suspended Solids, Powder, Viscous Fluid, Liquid, Granules |
Certification: | CE, ISO |
Application Area: | Food |
Samples: |
US$ 1000/Set
1 Set(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Enhancing Efficiency of Conveyor Systems and Manufacturing with Industrial Gearboxes
Industrial gearboxes play a crucial role in enhancing the efficiency of conveyor systems and manufacturing processes. They offer several benefits that contribute to smoother operations and improved productivity:
- Torque Multiplication: Industrial gearboxes allow for torque multiplication, enabling conveyor systems to handle heavy loads with ease. This ensures consistent and reliable movement of materials along the conveyor belts.
- Speed Control: Gearboxes provide precise speed control, allowing manufacturers to adjust the conveyor’s speed according to the specific production requirements. This helps optimize the manufacturing process by maintaining a steady flow of materials.
- Reduced Downtime: By efficiently transmitting power and torque, industrial gearboxes minimize wear and tear on conveyor components. This results in reduced maintenance and downtime, leading to increased operational uptime.
- Motion Synchronization: Gearboxes enable synchronized movement of multiple conveyor belts or other manufacturing components. This synchronization ensures that various stages of the manufacturing process are properly coordinated, reducing bottlenecks and errors.
- Energy Efficiency: Industrial gearboxes help optimize energy consumption by converting high-speed input power to the appropriate output speed for the application. This energy-efficient conversion contributes to cost savings and sustainability.
- Precision and Accuracy: Gearboxes provide precise motion control, which is essential for manufacturing processes that require accurate positioning, cutting, shaping, or assembly. This precision enhances the quality of the final products.
- Adaptability: Industrial gearboxes can be customized to match the specific requirements of conveyor systems and manufacturing equipment. This adaptability ensures that gearboxes can effectively handle a wide range of tasks and applications.
Whether it’s in material handling or manufacturing, industrial gearboxes enable conveyor systems to operate seamlessly, promoting efficient production processes, reduced operational costs, and enhanced product quality.
Factors to Consider When Selecting the Right Industrial Gearbox for an Application
Choosing the appropriate industrial gearbox for a specific application requires careful consideration of various factors to ensure optimal performance, reliability, and efficiency. Here are the key factors to consider:
- Load and Torque Requirements: Determine the maximum load and torque the gearbox will need to handle in the application.
- Speed Range: Consider the required speed range for both input and output shafts.
- Operating Conditions: Evaluate the environmental conditions, such as temperature, humidity, and presence of dust or chemicals.
- Space Constraints: Take into account the available installation space and clearance requirements.
- Efficiency: Choose a gearbox with the appropriate efficiency rating to minimize power losses.
- Noise and Vibration: Consider noise and vibration levels, especially in applications where low noise is crucial.
- Service and Maintenance: Assess ease of maintenance, accessibility for repairs, and availability of replacement parts.
- Mounting and Alignment: Ensure compatibility with the existing machinery and proper shaft alignment.
- Cost and Budget: Balance performance requirements with budget constraints.
- Expected Lifespan: Choose a gearbox with a suitable lifespan for the application’s durability needs.
- Gearbox Type: Select the appropriate gearbox type (helical, bevel, worm, etc.) based on the application’s specific requirements.
By carefully considering these factors and consulting with gearbox experts, you can make an informed decision and choose the right industrial gearbox that meets the unique demands of your application.
Types of Industrial Gearboxes and Their Functions
Industrial gearboxes come in various types, each designed for specific functions and applications. Here are some common types of industrial gearboxes and their functions:
- Helical Gearbox: Helical gearboxes have helical gears that provide smooth and quiet operation. They are suitable for applications requiring high efficiency and moderate to high torque transmission.
- Bevel Gearbox: Bevel gearboxes have bevel gears that transmit power between intersecting shafts at different angles. They are used in applications such as right-angle power transmission.
- Worm Gearbox: Worm gearboxes consist of a worm gear and a worm wheel. They offer high reduction ratios and are commonly used for applications where precise speed reduction is required.
- Planetary Gearbox: Planetary gearboxes feature planetary gears arranged around a central sun gear. They offer high torque density and are used in applications requiring compact size and high efficiency.
- Spur Gearbox: Spur gearboxes have straight-cut teeth and are suitable for applications with parallel shafts. They offer simple and cost-effective power transmission.
- Parallel Shaft Gearbox: Parallel shaft gearboxes transmit power between parallel shafts. They are versatile and used in a wide range of industrial applications.
- Right-Angle Gearbox: Right-angle gearboxes transmit power between shafts that are positioned at a 90-degree angle. They are used when space constraints or specific configurations require such an arrangement.
- Helical-Bevel Gearbox: Helical-bevel gearboxes combine the features of helical and bevel gearboxes, offering both efficiency and the ability to handle right-angle power transmission.
- Helical-Worm Gearbox: Helical-worm gearboxes combine helical and worm gearsets. They provide high reduction ratios and are suitable for applications requiring high torque and moderate efficiency.
Each type of industrial gearbox has its own unique characteristics and functions, making them suitable for specific industrial tasks and requirements.
editor by CX 2023-10-11
China manufacturer CZPT Shaft Mixer Mining Machine Drive Unit Coaxial Gear Reduction Gearing Electric Motor Coaxial Planetary Gearbox for Concrete Mixer wholesaler
Product Description
Solid Shaft Mixer Mining Machine Drive Unit Coaxial Gear Reduction Gearing Electric Motor Coaxial Planetary Gearbox for Concrete Mixer
P series planetary gearbox with good prices
1.P Series Planetary Gear Units is designed according to the involute planetary gear transmission with inner mesh,outer mesh and divided power employed reasonably.
2.P series planetary gear unit has the feature of light weight , small volume, high transmission ratio,
high efficiency, smooth rotation, low noise and good applicability.
3.P series is widely used in industries such as metallurgy, mining, hoisting and transportation, electrical power, energy resources, construction and building materials, light industry and traffic.
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
---|---|
Hardness: | Soft Tooth Surface |
Installation: | 90 Degree |
Layout: | Helical Gearbox |
Gear Shape: | Conical – Cylindrical Gear |
Step: | Stepless |
Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
---|
Choosing a Gearbox For Your Application
The gearbox is an essential part of bicycles. It is used for several purposes, including speed and force. A gearbox is used to achieve one or both of these goals, but there is always a trade-off. Increasing speed increases wheel speed and forces on the wheels. Similarly, increasing pedal force increases the force on the wheels. This makes it easier for cyclists to accelerate their bicycles. However, this compromise makes the gearbox less efficient than an ideal one.
Dimensions
Gearboxes come in different sizes, so the size of your unit depends on the number of stages. Using a chart to determine how many stages are required will help you determine the dimensions of your unit. The ratios of individual stages are normally greater at the top and get smaller as you get closer to the last reduction. This information is important when choosing the right gearbox for your application. However, the dimensions of your gearbox do not have to be exact. Some manufacturers have guides that outline the required dimensions.
The service factor of a gearbox is a combination of the required reliability, the actual service condition, and the load that the gearbox will endure. It can range from 1.0 to 1.4. If the service factor of a gearbox is 1.0, it means that the unit has just enough capacity to meet your needs, but any extra requirements could cause the unit to fail or overheat. However, service factors of 1.4 are generally sufficient for most industrial applications, since they indicate that a gearbox can withstand 1.4 times its application requirement.
Different sizes also have different shapes. Some types are concentric, while others are parallel or at a right angle. The fourth type of gearbox is called shaft mount and is used when mounting the gearbox by foot is impossible. We will discuss the different mounting positions later. In the meantime, keep these dimensions in mind when choosing a gearbox for your application. If you have space constraints, a concentric gearbox is usually your best option.
Construction
The design and construction of a gearbox entails the integration of various components into a single structure. The components of a gearbox must have sufficient rigidity and adequate vibration damping properties. The design guidelines note the approximate values for the components and recommend the production method. Empirical formulas were used to determine the dimensions of the various components. It was found that these methods can simplify the design process. These methods are also used to calculate the angular and axial displacements of the components of the gearbox.
In this project, we used a 3D modeling software called SOLIDWORKS to create a 3-D model of a gear reducer. We used this software to simulate the structure of the gearbox, and it has powerful design automation tools. Although the gear reducer and housing are separate parts, we model them as a single body. To save time, we also removed the auxiliary elements, such as oil inlets and oil level indicators, from the 3D model.
Our method is based on parameter-optimized deep neural networks (DBNs). This model has both supervised and unsupervised learning capabilities, allowing it to be self-adaptive. This method is superior to traditional methods, which have poor self-adaptive feature extraction and shallow network generalization. Our algorithm is able to recognize faults in different states of the gearbox using its vibration signal. We have tested our model on two gearboxes.
With the help of advanced material science technologies, we can now manufacture the housing for the gearbox using high-quality steel and aluminium alloys. In addition, advanced telematics systems have increased the response time of manufacturers. These technologies are expected to create tremendous opportunities in the coming years and fuel the growth of the gearbox housing market. There are many different ways to construct a gearbox, and these techniques are highly customizable. In this study, we will consider the design and construction of various gearbox types, as well as their components.
Working
A gearbox is a mechanical device that transmits power from one gear to another. The different types of gears are called planetary gears and are used in a variety of applications. Depending on the type of gearbox, it may be concentric, parallel, or at a right angle. The fourth type of gearbox is a shaft mount. The shaft mount type is used in applications that cannot be mounted by foot. The various mounting positions will be discussed later.
Many design guidelines recommend a service factor of 1.0, which needs to be adjusted based on actual service conditions. This factor is the combined measure of external load, required reliability, and overall gearbox life. In general, published service factors are the minimum requirements for a particular application, but a higher value is necessary for severe loading. This calculation is also recommended for high-speed gearboxes. However, the service factor should not be a sole determining factor in the selection process.
The second gear of a pair of gears has more teeth than the first gear. It also turns slower, but with greater torque. The second gear always turns in the opposite direction. The animation demonstrates this change in direction. A gearbox can also have more than one pair of gears, and a first gear may be used for the reverse. When a gear is shifted from one position to another, the second gear is engaged and the first gear is engaged again.
Another term used to describe a gearbox is “gear box.” This term is an interchangeable term for different mechanical units containing gears. Gearboxes are commonly used to alter speed and torque in various applications. Hence, understanding the gearbox and its parts is essential to maintaining your car’s performance. If you want to extend the life of your vehicle, be sure to check the gearbox’s efficiency. The better its functioning, the less likely it is to fail.
Advantages
Automatic transmission boxes are almost identical to mechanical transmission boxes, but they also have an electronic component that determines the comfort of the driver. Automatic transmission boxes use special blocks to manage shifts effectively and take into account information from other systems, as well as the driver’s input. This ensures accuracy and positioning. The following are a few gearbox advantages:
A gearbox creates a small amount of drag when pedaling, but this drag is offset by the increased effort to climb. The external derailleur system is more efficient when adjusted for friction, but it does not create as little drag in dry conditions. The internal gearbox allows engineers to tune the shifting system to minimize braking issues, pedal kickback, and chain growth. As a result, an internal gearbox is a great choice for bikes with high-performance components.
Helical gearboxes offer some advantages, including a low noise level and lower vibration. They are also highly durable and reliable. They can be extended in modular fashion, which makes them more expensive. Gearboxes are best for applications involving heavy loads. Alternatively, you can opt for a gearbox with multiple teeth. A helical gearbox is more durable and robust, but it is also more expensive. However, the benefits far outweigh the disadvantages.
A gearbox with a manual transmission is often more energy-efficient than one with an automatic transmission. Moreover, these cars typically have lower fuel consumption and higher emissions than their automatic counterparts. In addition, the driver does not have to worry about the brakes wearing out quickly. Another advantage of a manual transmission is its affordability. A manual transmission is often available at a lower cost than its automatic counterpart, and repairs and interventions are easier and less costly. And if you have a mechanical problem with the gearbox, you can control the fuel consumption of your vehicle with appropriate driving habits.
Application
While choosing a gearbox for a specific application, the customer should consider the load on the output shaft. High impact loads will wear out gear teeth and shaft bearings, requiring higher service factors. Other factors to consider are the size and style of the output shaft and the environment. Detailed information on these factors will help the customer choose the best gearbox. Several sizing programs are available to determine the most appropriate gearbox for a specific application.
The sizing of a gearbox depends on its input speed, torque, and the motor shaft diameter. The input speed must not exceed the required gearbox’s rating, as high speeds can cause premature seal wear. A low-backlash gearbox may be sufficient for a particular application. Using an output mechanism of the correct size may help increase the input speed. However, this is not recommended for all applications. To choose the right gearbox, check the manufacturer’s warranty and contact customer service representatives.
Different gearboxes have different strengths and weaknesses. A standard gearbox should be durable and flexible, but it must also be able to transfer torque efficiently. There are various types of gears, including open gearing, helical gears, and spur gears. Some of the types of gears can be used to power large industrial machines. For example, the most popular type of gearbox is the planetary drive gearbox. These are used in material handling equipment, conveyor systems, power plants, plastics, and mining. Gearboxes can be used for high-speed applications, such as conveyors, crushers, and moving monorail systems.
Service factors determine the life of a gearbox. Often, manufacturers recommend a service factor of 1.0. However, the actual value may be higher or lower than that. It is often useful to consider the service factor when choosing a gearbox for a particular application. A service factor of 1.4 means that the gearbox can handle 1.4 times the load required. For example, a 1,000-inch-pound gearbox would need a 1,400-inch-pound gearbox. Service factors can be adjusted to suit different applications and conditions.
editor by CX 2023-06-05
China Custom Gearbox P4300 Gearbox for Concrete Mixer P3301 Reducer bevel gearbox
Product Description
Gearbox P4300 Gearbox For Concrete Mixer P3301 Reducer
Elephant fluid power Provide Putzmeister, Schwing, Sebhsa, Sermac, Daf, Man, Mercedes-Benz. ZF/PMP/SAUER/BONFIGLIOLI and other supporting reducers and accessories.
The reducer, motor and pump are manufactured by CZPT fluid Power in China and are responsible for the post-support, 100% replacement of the original products. The warranty is 12 months.
Concrete Pump Spare Parts:
Auger Motors 470cc, 500cc,750cc
Hydraulic Piston Pumps A7VO, A11VO, A11VLO, A10VSO,A4VG,A4VSO,A2FO Series
Gear Pump, Charge Pump
Truck Mixer Spare Parts:
Hydraulic Piston Pumps & Motors A4VTG, PV22, PV23, A2FM, CZPT 54,46 Series
Gearbox: PMB7.5,PMP7.5sp Reducer,PMB 7.1R 130 Reducer,ZF P3301 Reducer ,CML10 Reducer CML16 Reducer,ZF PLM-9 Reducer PLM-7 Reducer, P4300 Reducer,TOP P90S Reducer,DD33 Reducer.
In stock and fast delivery.
Dear buyers, we have hundreds of products and models. Maybe the model you need does not appear in the search bar. Please contact our customer service for detailed information and prices. We are a manufacturer, We guarantee product quality and after-sales service, Our products are compatible wholesale, we will provide you more discounts if you request 2 sets or more. contact us, thank you very much!
Specifications: With high quality products, stable and accurate working performance.
And the delivery time for ordering here is fast, all products and accessories enjoy an 18-month long warranty; the models are complete, please contact customer service to enjoy the discount.
Packaging & Delivery Details:
Wood box: Anti-rust treatment+poly bag+Foam box+wooden box.
· Over 1 MILLION parts in stock-OEM & Aftermarket
· Current and obsolete parts available
· Stock OEM and OEM spec CZPT parts
· CZPT parts are inspected and tested
· CZPT options provide a substantial cost savings over OEM
· Deep discounts on refinished parts
· Your best source for hard to find parts that the OEM does not offer
· Most parts shipped from stock the same day
·Comprehensive 18 month warranty
Application: | Motor, Machinery, Agricultural Machinery, Car |
---|---|
Transport Package: | Sea/Air/Rail/Express Wooden Box |
Specification: | 60*60*70 |
Trademark: | Elephant fluid power |
Origin: | China |
Samples: |
US$ 800/Piece
1 Piece(Min.Order) | |
---|
Types of Gearboxes Used in Wind Turbines
Many manufacturers of wind turbines have chosen different solutions for the drive train of the turbines. Most prefer gearboxes because of their durability. These have several design features that make them well suited to shocks, stresses and wear. Regardless of the type of gearbox used, continuous maintenance and monitoring can extend the lifespan of these machines. Performing these tasks regularly can help detect and resolve any problems before they become serious. Here are some of the problems associated with gearboxes.
Coaxial helical gearbox
The R series helical inline gearbox is a high-quality speed reducer for heavy-duty industrial applications. These units are designed with increased power density in mind and are equipped with various cooling options. High-grade seals and lubricants help to increase efficiency and minimize thermal loading. They are ATEX-compliant. Their reversible modules are an excellent choice for high-speed applications, such as compressors, compressor blowers, and pumps.
The normal module set of helical gearbox is manufactured using the same tooth-cutting techniques as spur gears. This allows the production of higher-quality, more economical, and more compact helical gears. Although the performance of helical gears is lower than spur gears, they are durable and capable of transferring motion and power between two shafts. And because they are able to handle a much greater load, they are preferred for heavy-duty applications.
The main tooth form of a helical gearbox presents fixed velocity ratios, even if the center gap is not completely set. This requirement is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to a set of paper spur gears, with the exception that the sections must stagger in opposite directions. There are two kinds of helical gears for parallel shafts: left-handed and right-handed.
The Industrial Gearbox market is segmented based on product type, application, and geography. The report analyzes the competitive scenario by segmenting the market by region, company, and type. Using this information, it estimates market size, revenue, and consumption. The report also features key information about COVID-19 and its impact on the overall industry. And it also provides a competitive landscape with industry-leading players.
Industrial gearboxes are integrated with devices and make automation processes more efficient and reliable. Increasing labor costs, shortage of skilled labor, and the ageing workforce are driving the demand for automation technologies. The industry requires newer and more advanced models and technologies to compete in the global market. You can use Coaxial helical gearbox in a variety of applications. Its benefits are endless. If you are looking for a reliable, high-performance industrial gearbox, CZPT can help you find it.
Worm reduction gearbox
As a general rule, larger center distance worm reduction gearboxes are more efficient than smaller ones. Worm gearboxes with 2.6-in. center distances start to lose efficiency as their ratios increase. Larger center distances tend to have higher efficiency than smaller ones. However, this difference may not always be enough to justify the higher investment. Worm gear reducers typically cost less than equivalent helical units.
The use of aluminum for worm reduction gearboxes is a popular choice for those involved in the manufacturing of Packaging Equipment. In addition to being lightweight, aluminum worm reduction gearboxes have high strength and rigidity. Manufacturers recommend this choice because of its high rigidity and durability. While purchasing aluminum worm reduction gearboxes, keep in mind that they are more expensive than steel versions. However, they have a longer lifespan and are highly resistant to wear.
The worm’s helix angle is larger than a helical gear, which allows a much higher gear ratio. In addition, the worm’s body is usually longer in the axial direction than helical gears. Worm reduction gears are often left-handed, and British or Indian standards are usually followed. The worm wheel is made of hardened alloy steel PB2-C, while the gearbox case is made of hardened alloy steel FG 220 or FG 250res.
The worms in a sacrificial system are relatively safe from wear. Instead, the softer wheel is the cause of most wear and tear. The oil analysis report for a sacrificial system shows low iron levels and high copper concentrations. However, if a worm reduction gearbox has a bad reputation, you should consider purchasing a new one. If the worm gears are in good condition, the gearbox is still a viable option for a new or replacement vehicle.
The advantages of a worm reduction gearbox are numerous. The worm gearbox is widely used in industrial settings, where it provides torque and speed reduction to move products. Worm gearboxes are also commonly used in automatic security gates, which will not run in reverse. Most security gates use two separate worm drives to keep the gate in the closed position. There are also many other uses for worm reducers. You can learn more about the benefits of worm gearboxes by reading below.
Stainless steel gearbox
Stainless steel gearboxes offer a number of advantages over standard gearboxes. They match the existing stainless motor design and cost 50 percent more on average. They have stainless output shafts and housings as well as corrosion resistant hardware and a food grade lubricant. Stainless steel gearboxes feature IP 65 sealing, Viton shaft seals at the input and output shafts, and a Buna o-ring between the housings. Stainless steel gearboxes also eliminate flat surfaces and allow for a cylindrical design.
Stainless steel gearboxes are more durable than traditional cast iron or epoxy-painted gearboxes. These gearboxes can withstand repeated washdown operations without damage. They also do not collect particles or bacteria. And because stainless steel does not corrode, stainless steel gearboxes can withstand harsh environments, such as oily or greasy environments. Because stainless steel gearboxes are corrosion-resistant, they require little maintenance. They are also easier to clean and maintain, resulting in fewer replacements and a longer life span for your gearbox.
Stainless steel gearboxes are a great choice for food and other industries that require high hygiene standards. In addition to its durability, stainless steel gearboxes are ideal for applications in environments that require high levels of humidity and water. They are also life-lubricated, and they can be supplied with food-grade oils or water. The CZPT Gears stainless gearbox is a versatile option for a variety of applications.
Stainless steel gearboxes offer superior corrosion protection and can withstand harsh environments. The stainless steel cover, housing, and external hardware ensure superior corrosion protection. If you have questions about the varying benefits of stainless steel gearboxes, contact a CZPT Gear sales representative to learn more about your options. And if you are not sure which type is right for your needs, contact a CZPT Gear sales representative to find the perfect solution for your business.
1 speed gearbox
Volkswagen Group Components manufactures the one speed gearbox. The gearbox has a high-performance electric drive motor that produces 310 Nm of torque over a wide speed range. Designed for maximum range, this gearbox uses a single gear for all driving situations. It is extremely quiet, too, and requires precision manufacturing. Volkswagen has also made it available in a reverse-gear configuration with power electronics. Volkswagen’s ID.3 EV’s e-drive motor is a perfect example of this.
The first part of the transmission corresponds to the even and odd gears, while the second part has the straighter gears. A single gear set can change between both modes. An intermediate gear set is also possible. A lastshelf gear can be formed by hydraulically betigte Lamellenkupplungen. Both types of gears can be exchanged between partial transmissions. The invention may furthermore include a transmission with the same gear ratios as the first part of the transmission.
Another variation of the one speed gearbox is the CVT. This type of gearbox has only one drive unit, which means it does not require a clutch or brake. Its power is derived from the torque generated by the Internal Combustion Engine at a particular speed. The engine cannot sustain such high torque levels above 5500 RPM, which will reduce the MPG. Also, raising the RPM will reduce the acceleration, and in severe cases may lead to an engine crash.
As the number of applications for a 1 speed gearbox increases, its design and functionality will continue to evolve. Bosch Rexroth has developed its eGFZ gearbox based on customer feedback. They are currently working on various pilot projects and hope to put it into production in the next few years. However, if you want to buy a 1 speed gearbox now, consider the benefits of a first-rate design.
editor by CX
2023-04-22
China factory planetary gear motor gearbox for concrete mixer gear motor micro small gear reducer motor wholesaler
Gearing Arrangement: Worm
Output Torque: 2.6N.m ~ 2379N.m
Rated Power: 0.06KW ~ 7.5KW
Input Speed: 750~3,000 Rpm
Output Speed: 10-400 Rpm
Model Number: RV/NRV/NMRV25~150 nmrv micro small gear reducer motor
Certificate: ISO9001, CE, CCC
Mounting Position: Horizontal (foot mounted) or Vertical (flange mounted)
Color: According to customer’s request
Material: Steel or cast iron
Gear material: 20CrMnTiH
Transmission ratio: 7.5 -100
Gear precision: GBT3~6
Worm Shaft: 40Cr
Service: 24 hours
Name: NMRV worm gearbox micro small gear reducer planetary gear motor
Packaging Details: 1, Industrial pakaging: Plastic tube+carton+wooden pallets 2, Commercial packing: Plastic bag+color box+carton+wooden pallets 3, As client’s requirement NMRVsmall worm gear gearbox prices transmission gear reduction elevator gear reducer worm transmission mini planetary gearbox for concrete mixer micro small gear reducer motor planetary gear motor
Port: ZheJiang
NMRV gearbox for agricultural machinery worm gear reducer gearbox prices gear motor elevator gear reducer worm gear reducer worm transmission mini planetary gear motor gearbox for boats gearbox for concrete mixer micro small gear reducer motor
rv worm gear reducer
small worm gear reducer
micro small gear reducer motor Product Overview:
1, RV worm gear design and manufacturing standards by Q/MD1-2000 technical quality .
2 , the product meets the national standard GB10085-88 parameters based on the worm wheel , worm reducer learn the most advanced technology , novel and unique style of “square box ” outside the structure , cabinet appearance , quality aluminum die casting .
3, RV worm gear reducer has been widely used in machinery and equipment in metallurgy , mining, transportation, water, chemicals, food, beverages, textiles, tobacco, High quality hollow harmonic drive gearbox packaging, environmental protection and many other industries and fields of technology and equipment , praised by users , is a large modern industrial equipment to achieve low-noise ratio , the best choice for high stability mechanical device deceleration transmission control .
Features:
1 , the mechanical structure is compact , lightweight, compact and efficient, good heat exchange performance , fast heat dissipation ;
2 , easy to install, flexible and nimble , superior performance , ease of maintenance and overhaul ;
3 , large transmission ratio, torque, withstand high overload capacity ;
4 , smooth operation, low noise , durable ; applicability, Adjustable Pulley Pull Rope Waist Back Support Belt With PVC Support Plate Inside safety and reliability of large .
Technical parameters:
Power : 0.06KW ~ 7.5KW
Torque : 2.6N.m ~ 2379N.m
Transmission ratio :7.5 -100
power transmission gearbox
The basic model:
RV25 RV30 RV40 RV50 RV63 RV75 RV90 RV110 RV130 RV150
NRV25 NRV30 NRV40 NRV50 NRV63 NRV75 NRV90 NRV110 NRV130 NRV150
NMRV25 NMRV30 NMRV40 NMRV50 NMRV63 NMRV75 NMRV90 NMRV110 NMRV130 NMRV150
Packaging & Shipping
NMRV worm gear reducer forward reverse gearbox gearbox for agricultural machinery worm transmission mini
1, Industrial pakaging: Plastic tube+carton+wooden pallets2, Commercial packing: Plastic bag+color box+carton+wooden pallets3, As client’s requirement
4, Shipping: By sea, by air, by DHL Fedex UPS etc
Company Information
As a leader manufacturer of industrial motors, speed reducers, drives etc in China, our company has always been adhering to the ” leading technology innovation, achieving excellent quality” concept, the main products are: Micro gear motors, medium-size gear motors, Brake speed regulating motors, torque motors, DC motors, NMRV worm motor, helical bevel gear motors, WP RV series worm reducer, rigid tooth flank helical gear units, Helical worm gear units, BWD3 BLD3 drive reducer cycloidal gearbox single-stage gearbox Speed Reducer Parallel shaft helical gear units, Spiral bevel gear units, SWL& JW Worm screw jack, Rigid tooth flank gear units, Planetary gear units etc transmission products, which are widely used in various industrial production lines, Such as transportation machinery, food machinery, medical machinery, printing machinery, textile machinery, packaging machinery, office equipment, instrumentation and other fields, is the preferred supporting products for automation equipments.
WHY CHOOSE US? -SUPERB SERVICE, LOW COSTS, HIGH STABILITY, ADVANCED QULITY, STABLE WORKFORCE -We own about 300 sets processing equipments and testing equipments to guarantee the high precision and quality. such as REISHAUER precision gear grinding machine(Switzerland), PFAUTER gear hobbing machine(Germany), Gleason bevel gear milling machine, three-coordinates measuring machine etc.
Our Services
NMRV worm gear reducer reductor gearbox for agricultural machinery
Types of Gearboxes
There are several types of gearboxes. Some are known as helical gear reducers, while others are called planetary gearboxes. The article also discusses Continuously Variable Transmission (CVT) and helical gear reducer. If you are interested in purchasing a new gearbox, make sure to read our articles on these different types. If you are confused, consider reading our articles on planetary gearboxes and helical gear reducers.
planetary gearbox
The planetary gearbox has several advantages. Its compact design and light weight allows it to transmit high torques while remaining quiet. The gears are connected to one another through a carrier, which is typically fixed and helps transmit torques to the output shaft. Its planetary structure arrangement also reduces backlash and provides high rigidity, which is important for quick start and stop cycles and rotational direction change. Depending on the design and performance desired, planetary gearboxes are categorized into three main types:
The type of planetary gears used in a given application determines the overall cost of the unit. Manufacturers offer a range of prices, and they can help you determine which gearbox is right for your needs. You should also ask a manufacturer for the cost of a planetary gearbox. By asking about price and specs, you can avoid wasting money and time on a planetary gearbox that does not perform up to its potential.
A planetary gearbox is probably installed in your new car’s automatic transmission. For more information, consult your owner’s manual or call the dealer’s service department. This type of gearbox is more complex than other types of gearboxes, so if you don’t know much about them, do an internet search for “planetary gearbox.”
The teeth of a planetary gearbox are formed by the stepping motion of two gears: the sun gear and the inner ring. The sun gear is the input, while the planetary gears rotate around the sun gear. Their ratio depends on the number of teeth and the space between the planets. If you have a 24 tooth sun gear, the planetary gears’ ratio will be -3/2. The sun gear is also attached to the axle.
Another advantage of a planetary gear system is that it can generate high torques. The load is shared among multiple planet gears. This makes the gears more resilient to damage. A planetary gearbox can be as high as 332,000 Nm, and can be used in vehicles and industrial applications requiring medium to high torque. A planetary gear system is a great alternative to a traditional transmission. So, how does it work?
helical gearbox
The main difference between the helical gearbox and the spur gear is the center distance between the teeth. The helical gearbox has a larger pitch circle than the spur gear and thus requires a radial module. In addition, the two types of gears can only be made with the same tooth-cutting tool as the spur gear. However, the helical gearbox is more efficient in terms of production costs.
The helical gearbox is a low-power consumption, compact type of gearbox that is used for a wide range of industrial applications. They are highly durable and withstand high loads with utmost efficiency. The helical gearbox can be manufactured in cast steel and iron for small and medium units. This type of gearbox is also commonly used for crushers, conveyors, coolers, and other applications that need low power.
The helical gear has many advantages over the spur gear. It produces less noise. It has less friction and is less likely to wear out. It is also quieter than spur gears. This is because multiple teeth are in mesh. Because the teeth are in mesh, the load is distributed over a larger area, resulting in a smoother transition between gears. The reduction in noise and vibration reduces the risk of damaging the gear.
The helical gear’s axial excitation force is obtained using a linearized equation of motion in the rotational direction. The damping coefficient of the equation is 0.07. The helical gear is made up of a steel shaft with a diameter of 20 mm and a 5 mm thick aluminum plate. The stiffness of the bearing is 6.84 x 107 N/m. The damping force of the plate is 2,040 kg/m2/s.
The worm gearbox has a better efficiency ratio than the helical one, but it is less efficient in low-ratio applications. In general, worm gearboxes are more efficient than helical gearboxes, although there are some exceptions to this rule. A helical gearbox is better for applications that require high torque. It may also be more economical in the long run. If you are considering a helical gearbox, consider the advantages it has over worm gearboxes.
helical gear reducer
A helical gear reducer for a machine’s gearbox is an integral component of the drive system. This unit amplifies torque and controls speed and, therefore, compliments the engine by rotating slower than the engine’s input shaft. A helical gear reducer is a compact gearbox component that is used in industrial applications. A variety of sizes is available to suit various machine configurations. The following sections will discuss some of the different types available.
Designed by experts and engineers, a helical gear reducer is a surprisingly small and light gear that satisfies the needs of many machine applications. It features a large transmission torque, a low starting and running speed, and a fine classification of transmission ratios. A helical gear reducer is lightweight and easily connected to other gears, and it features a high technical content.
In order to avoid errors and poor performance, regular maintenance is a must. The proper lubrication of the gear reducer can minimize failures, errors, and poor performance. Every gear reducer manufacturer sells a suitable lubricant, which must match the properties of the machine’s drive mechanism. It is also advisable to check the lubrication regularly to avoid any deterioration of the unit’s performance.
While the worm gearbox may be better for applications where torque is high, the helical gear reducer offers greater efficiency at lower cost. Although worm gearboxes may be cheaper initially, they are less effective at higher ratios. Even if the worm gear is more expensive to buy, it still offers 94% efficiency, which makes it more cost-effective. There are some significant advantages to both types of gearboxes.
The main advantage of a helical gear reducer over a spur gear is its smoother operation. Unlike spur gears, which have teeth that are straight, helical gears have angled teeth that gradually engage with each other. This helps ensure that the gear does not grind or make excessive noise when it turns. Additionally, they are less commonly used in automation and precision machinery. They are often used in industrial applications.
Continuously variable transmission
A Continuously Variable Transmission (CVT) is an automatic transmission that can run through a vast number of gears. Unlike a standard automatic transmission, it can run at any speed, even at a low rev. The CVT is also capable of running at infinitely low gears. Its basic function is to provide different torque ratios to the engine. In addition to delivering power, CVTs have other benefits.
One of the major advantages of a CVT is its simplicity. Its simplicity translates into fewer moving parts, which means less maintenance. The CVT’s simplicity also means that it can handle a wide variety of different types of road conditions and driving styles. In addition to being a great alternative to a traditional automatic transmission, CVTs can be used on many other types of vehicles, including tractors, snowmobiles, motor scooters, and power tools.
A CVT is much smoother than a conventional automatic transmission. It never has to hunt for a gear. It also responds well to throttle inputs and speed changes. Both of these technologies are available on many modern vehicles, including the Nissan Rogue and Mazda CX-5. It’s important to note that each of these transmissions has its pros and cons. So, if you’re looking for a car with a CVT, make sure to read the reviews. They’ll help you decide which transmission is right for you.
Another advantage of a CVT is its fuel efficiency. Many cars now feature CVTs, and they’re becoming increasingly popular with automakers. In addition to fuel efficiency, most cars with CVTs also have a smoother ride. There’s no more sudden downshifts or gear hunting. This makes driving a lot easier. And, the added benefits of smoother driving make CVTs the ideal choice for many drivers.
Although a CVT is more common among Japanese car manufacturers, you’ll find CVTs on European car models as well. The Mercedes-Benz A-Class, B-Class, and Megane are some examples of vehicles that use this technology. Before making a decision, consider the reliability of the model in question. Consumer Reports is a good resource for this. It also offers a history of use and reliability for every type of car, including the Honda Accord.
The Main Planetary Gearbox on factory The 7 Concrete Mixer Tru manufacturer ck (FK330B)
Product Description
The main planetary gearbox on the 7 concrete mixer truck (FK330B)
Specification Model |
FK130B | FK230B | FK270B | FK330B | FK430B | FK530B | FK730B | FK830B | FK930B |
Mixer Volume (cbm) | 3-5 | 4-6 | 6-7 | 7-8 | 9-10 | 10-12 | 12-14 | 15-16 | 17-20 |
Output Torque (Nm) | 30000 | 36000 | 42000 | 48000 | 54000 | 70000 | 75000 | 85000 | 95000 |
Reduction ration | 103 | 103 | 128.5 | 133.7 | 135.5 | 135.5 | 144.3 | 141.3 | 141.3 |
Drum angle (°) | 15 | 15 | 15 | 15 | 15 | 15 | 13 | 12 | 10 |
Input rotation | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 |
Radial load (kN) | 70 | 72 | 100 | 130 | 160 | 170 | 190 | 235 | 275 |
Axial load (kN) | 20 | 22 | 28 | 36 | 45 | 50 | 60 | 70 | 90 |
Weight (kg) | 160 | 162 | 175 | 185 | 325 | 330 | 340 | 405 | 415 |
Lubricating oil (L) | 5.5 | 7.0 | 7.0 | 7.5 | 11.5 | 11.5 | 11.5 | 13.5 | 15.5 |
Swing angle of Flange plate | ±6 | ±6 | ±6 | ±6 | ±6 | ±6 | ±6 | ±6 | ±6 |
Model of Gear oil | SAE 85W-90/API GL4 GL5 | SAE 85W-90/API GL4 GL5 | SAE 85W-90/API GL4 GL5 | SAE 85W-90/API GL4 GL5 | SAE 85W-90/API GL4 GL5 | SAE 85W-90/API GL4 GL5 | SAE 85W-90/API GL4 GL5 | SAE 85W-90/API GL4 GL5 | SAE 85W-90/API GL4 GL5 |
Connection port of Water pump | NO | NO | NO | NO | NO | NO | NO | NO | NO |
Connection flange of CZPT ulic motor | SAE C 16/32 Z21 |
SAE C 16/32 Z21 |
SAE C 16/32 Z21 |
SAE C 16/32 Z21 |
SAE C 16/32 Z21 |
SAE C 16/32 Z21 |
SAE C 16/32 Z21 |
SAE C 16/32 Z21 |
SAE C 16/32 Z21 |
Hardened Tooth Cost Surface Gear Unit Coax best ial Concrete Mixer Gearbox
Product Description
Hardened Tooth Surface Gear Unit Coaxial Concrete Mixer Gearbox
Feature:
-
Realized parallel shaft,right-angle shaft modes and horizontal,vertical mounting modes. Using less component parts.
-
Applying CZPT d grinding process which improved the stability and the efficiency of transmit CZPT with lower noise.
-
Input mode: motor connected flange, shaft input
-
Output mode:solid shaft with flat key,hollow shaft with flat key,hollow shaft with shrink disk,hollow shaft with spline connection, solid shaft with spline connection, solid shaft with flange.
-
Mounting mode:vertical, horizontal, swing base-mounted, torque-arm-mounted.
-
Ratio range:1.23~450. It can be higher when combining with K&R series reducer.
H & B SERIES
Transmission stage B2 (ratio from 5~18) B3 (ratio from 12.5~90) B4 (ratio from 80~400) Transmission stage H1 (ratio from 1.25~5.6) H2 (ratio from 6.3~28) H3 (ratio from 22.4~112) H4 (ratio from 100~450) Housing material HT250 high-strength cast iron Housing hardness HBS190-240 Gear material 20CrMnTi alloy steel Surface hardness of gears HRC58°~62 ° Gear core hardness HRC33~40 Input / Output shaft material 42CrMo alloy steel Input / Output shaft hardness HRC25~30 Machining precision of gears accurate grinding, 6~5 Grade Lubricating oil GB L-CKC220-460, Shell Omala220-460 Heat treatment tempering, cementiting, quenching, etc. Efficiency 92%~98% (depends on the transmission stage) Noise (MAX) 60~68dB Temp. rise (MAX) 40ºC Temp. rise (Oil)(MAX) 50ºC Vibration ≤20µm Backlash ≤20Arcmin Brand of bearings China CZPT brand HRB,LYC,ZWZ or other brands requested, NSK….. Brand of oil seal NAK— ZheJiang or other brands requested
Technical parameters
Ratio | 3.41-289.74 |
Input CZPT | 0.12-160KW |
Output torque | 61-23200N.m |
Output speed | 5-415rpm |
Mounting type | Foot mounted, flange mounted, foot and flange mounted, single-stage foot mounted, single stage flange mounted, Flange-mounted with extended bearing hub |
Input Method | Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor |
Brake Release | HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position) |
Thermistor | TF(Thermistor protection PTC thermisto) TH(Thermistor protection Bimetal swotch) |
Mounting Position | AB |
Type | H |
Output shaft dis. | 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm |
Housing material | HT200 high-strength cast iron from R37,47,57,67,77,87 |
Housing material | HT250 CZPT strength cast iron from R97 107,137,147,157,167,187 |
Heat treatment technology | carbonitriding and hardening treatment |
Efficiency | 92%-97% |
Lubricant | VG220 |
Protection Class | IP55, F class |
QUALITY CONTROL
Quality:Insist on Improvement,Strive for CZPT With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of CZPT products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of CZPT transmission
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value
3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures to prevent recurrence.
4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend; found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state
5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the CZPT er’s position on the finished product quality verification, in order to ensure the quality of CZPT er expectations and needs.
6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product is a product inspection to determine the qualified
Certifications
packaging
FAQ
1. How to choose a gearbox which meets CZPT requirement?
You can refer to CZPT catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
2. What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) CZPT special requirements.
3. What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
4. Doyou sell motors?
We have stable motor suppliers who have been coperating with us for a CZPT -time. They can provide motors
with high quality.
Hardened T near me shop ooth Surface Coaxial price Concrete Mixer Good Service Gear Unit Reducer Gearbox
Product Description
Hardened Tooth Surface Coaxial Concrete Mixer CZPT Service Gear Unit reducer gearbox
Feature:
-
Realized parallel shaft,right-angle shaft modes and horizontal,vertical mounting modes. Using less component parts.
-
Applying CZPT d grinding process which improved the stability and the efficiency of transmit CZPT with lower noise.
-
Input mode: motor connected flange, shaft input
-
Output mode:solid shaft with flat key,hollow shaft with flat key,hollow shaft with shrink disk,hollow shaft with spline connection, solid shaft with spline connection, solid shaft with flange.
-
Mounting mode:vertical, horizontal, swing base-mounted, torque-arm-mounted.
-
Ratio range:1.23~450. It can be higher when combining with K&R series reducer.
H & B SERIES
Transmission stage B2 (ratio from 5~18) B3 (ratio from 12.5~90) B4 (ratio from 80~400) Transmission stage H1 (ratio from 1.25~5.6) H2 (ratio from 6.3~28) H3 (ratio from 22.4~112) H4 (ratio from 100~450) Housing material HT250 high-strength cast iron Housing hardness HBS190-240 Gear material 20CrMnTi alloy steel Surface hardness of gears HRC58°~62 ° Gear core hardness HRC33~40 Input / Output shaft material 42CrMo alloy steel Input / Output shaft hardness HRC25~30 Machining precision of gears accurate grinding, 6~5 Grade Lubricating oil GB L-CKC220-460, Shell Omala220-460 Heat treatment tempering, cementiting, quenching, etc. Efficiency 92%~98% (depends on the transmission stage) Noise (MAX) 60~68dB Temp. rise (MAX) 40ºC Temp. rise (Oil)(MAX) 50ºC Vibration ≤20µm Backlash ≤20Arcmin Brand of bearings China CZPT brand HRB,LYC,ZWZ or other brands requested, NSK….. Brand of oil seal NAK— ZheJiang or other brands requested
Technical parameters
Ratio | 3.41-289.74 |
Input CZPT | 0.12-160KW |
Output torque | 61-23200N.m |
Output speed | 5-415rpm |
Mounting type | Foot mounted, flange mounted, foot and flange mounted, single-stage foot mounted, single stage flange mounted, Flange-mounted with extended bearing hub |
Input Method | Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor |
Brake Release | HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position) |
Thermistor | TF(Thermistor protection PTC thermisto) TH(Thermistor protection Bimetal swotch) |
Mounting Position | AB |
Type | H |
Output shaft dis. | 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm |
Housing material | HT200 high-strength cast iron from R37,47,57,67,77,87 |
Housing material | HT250 CZPT strength cast iron from R97 107,137,147,157,167,187 |
Heat treatment technology | carbonitriding and hardening treatment |
Efficiency | 92%-97% |
Lubricant | VG220 |
Protection Class | IP55, F class |
QUALITY CONTROL
Quality:Insist on Improvement,Strive for CZPT With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of CZPT products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of CZPT transmission
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value
3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures to prevent recurrence.
4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend; found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state
5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the CZPT er’s position on the finished product quality verification, in order to ensure the quality of CZPT er expectations and needs.
6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product is a product inspection to determine the qualified
Certifications
packaging
FAQ
1. How to choose a gearbox which meets CZPT requirement?
You can refer to CZPT catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
2. What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) CZPT special requirements.
3. What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
4. Doyou sell motors?
We have stable motor suppliers who have been coperating with us for a CZPT -time. They can provide motors
with high quality.